Ricoh 3010 Printer Reference page 14

❖ System
Print Error Report
Auto Continue
Memory Overflow
Job Separation
Auto Delete Temporary Print Jobs
Auto Delete Stored Print Jobs
Initial Print Job List
Memory Usage
Duplex
Copies
Blank Page Print
Edge Smoothing
Toner Saving
Printer Language
Sub Paper Size
Page Size
Letterhead Setting
6
Menu Description
You can print an error report when a printer
or memory error occurs.
You can select this to enable Auto Continue.
When it is On, printing continues after a sys-
tem error occurs.
Select this to have a memory overflow error
report printed.
You can enable Job Separation.
This menu can be selected only when a fin-
isher (optional) is installed.
You can select to automatically delete print
jobs temporarily stored in the machine.
You can select to automatically delete print
jobs stored in the machine.
You can set the default Printer screen when
you press [Print Jobs].
You can select the amount of memory used
in Font Priority or Frame Priority, according
to paper size or resolution.
You can select to have print on both sides of
each page.
You can specify the number of print sets.
This setting is disabled if the number of pag-
es to print has been specified with the printer
driver or another command.
You can select whether or not to print blank
pages.
You can set to smoothen the edges of printed
characters.
Make setting to select either to apply or not
to apply Toner Saving.
You can specify the printer language.
You can enable the Auto Substitute Paper
Size (A4↔LT) feature.
You can select the default paper size.
You can rotate original images when print-
ing.
When printing, original images are always
rotated by 180 degrees. Therefore, output
might not be as expected when printing onto
letterhead or preprinted paper requiring ori-
entation. Using this function, you can specify
image rotation.