Differential Construction; Differential, Flow, And Absolute Models - Siemens 7MF4033 Installation Manual

Installation Guide
1 Process Connection 1/4-18NPT for absolute
pressure + side
2 Mounting thread M10, M12 or 7/16-20UNF
3 Blanking plug
4 Electrical connection:
Screwed gland M20 x 1.5
Screwed gland 1/2-14NPT
5 Field terminals; remove enclosure cap for
access
6 Electronics module and display; remove
enclosure cap for access
7 Hinged access cover over magnetic
pushbuttons
8 Sealing screw with vent shown (optional)
9 Side vent for measuring liquid
FIGURE 2 Differential Construction; Differential, Flow, and Absolute Models
6
10 Side vent for measuring gas (supplement H02)
11 Mounting bracket, optional
12 Enclosure setscrew
13 Enclosure rotation limits (see 14 reference
arrow)
14 Enclosure rotation reference arrow; see the
Installation section for details
15 Tag plate
16 Approval plate; Rating plate on other side
17 Enclosure ground screw
This Figure is for Models 7MF4333, 7MF4433,
and 7MF4533.
UMSITRPDS3-1
February 2012