Mainpine EPC Operating Instructions Manual page 12

CONNECTION
EPC TERMINAL ASSIGNMENT
24 V DC VERSION 24 V DC VERSION
TETHERED VERSION
N NC L
P2 P1 NC
EPC_T_V21_16A_111
STATUS
BLU - N/C
GRN - CHG
RED - ERR
BL GN RD
OV CP IC
EPC TERMINAL ASSIGNMENT
TERMINAL
L (LINE)
N (NEUTRAL)
0V (GROUND)
ML (MOTOR LOCK)
MU (MOTOR UNLOCK)
HF (LOCK FEEDBACK)
NC (NOT CONNECTED)
P1
P2
P3
P4
P5
P6
PP (PROXIMITY PIN)
GN (GREEN LED)
BL (BLUE LED)
RD (RED LED)
CP (CONTROL PIN)
IC (INPUT CURRENT PIN)
* On tethered installations the RCBO and contactor should be rated according to the maximum current capacity of the EPC . On free-cable
installations the RCBO and contactor should be rated 16A .
** For 120-370V DC on L, connect N to ground (0V) .
12
N NC L
P2 P1 NC
EPC_T_V21_16A_111
STATUS
BLU - N/C
GRN - CHG
RED - ERR
BL GN RD
OV CP IC
DESCRIPTION
This is where the AC 'live' or 'line' connection is made (90-264V @ 50/60 Hz AC)**
This is where the AC 'neutral' connection is made (90-264V @ 50/60 Hz AC)**
This is where the 'ground' connection is made**
This provides 12V 300mA for 500 ms to engage the lock
This provides 12V 300mA for 500 ms to disengage the lock
Reads lock feedback
Relay 1 live from RCBO*
Relay 1 coil on the contactor*
Relay 2 live from 32A RCBO
Relay 2 coil on the 32A contactor
Relay 3 live from 63A RCBO
Relay 3 coil on the 63A contactor
This connects to the PP connector on the IEC61851 EVSE connector
For external LED connection for green indication (5V 30mA)
For external LED connection for blue indication (5V 30mA)
For external LED connation for red indication (5V 30mA)
This connects to the CP connector on the IEC61851/J1772 EVSE connector
This connects to the IC resistor, switch, or dial
110 V/230 V AC VERSIONS 110 V/230 V AC VERSIONS
FREE CABLE VERSION
ML MU HF N NC T
PP NC NC P2 P1 NC
EPC_x_Vxx_xxA_xxx
STATUS
BLU - N/C
GRN - CHG
RED - ERR
P3 P4 P5 RD RL GN
P6 NC NC IC CP OV
ML MU HF N NC T
PP NC NC P2 P1 NC
EPC_x_Vxx_xxA_xxx
STATUS
BLU - N/C
GRN - CHG
RED - ERR
P3 P4 P5 RD RL GN
P6 NC NC IC CP OV