When Replacing Dvd Mecha Assy; Disc Removal Method At No Power Supply - Pioneer XV-DV575 Service Manual

1

1.3 WHEN REPLACING DVD MECHA ASSY

[ Removing the DVD MECHA Assy ]
Before removing Pickup PCB and DVD PCB connector, short circuit the position shown in Fig. 1 usinga soldering iron.
A
If you remove the DVD MECHA Assy with no soldering, the Laser may be damaged.
[ Installing the DVD MECHA Assy ]
Remove all the soldering on the short circuit position after the connection of Pickup PCB and DVD PCB connector.
NOTE
• Be sure to use lead-free solder and a soldering iron.
• When Soldering/Removing of solder, use the draw in equipment over the Pickup Unit to prevent the Flux smoke from it.
B
C

1.4 DISC REMOVAL METHOD AT NO POWER SUPPLY

1. Slide the Rack Loading (White) toward the arrow direction by using a minus driver to release the lock.
(Refer to Fig. 1)
2. Manually open the Tray.
D
NOTE:
Please strongly pushing Rack Loading (White) to release the lock because the tray doesn't go out easily.
E
Tray open
F
6
1
2
Minus screwdriver
Bottom view
XV-DV575
2
3
Fig. 1
Fig. 1
3
4
Short circuit using a
soldering iron.
Pickup PCB
Rack Loading (White)
4