Disassembly - Pioneer XV-DV575 Service Manual

5

7. DISASSEMBLY

Note 1: Do NOT look directly into the pickup lens. The laser beam may cause eye injury.
Note 2: Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures
described here are common.
Disassembly
1
Bonnet, Tray Panel
1
Remove the bonnet by removing the nine screws.
1 Press the u STANDBY/ON button to turn on the
power.
2 Press the h OPEN/CLOSE button to open the tray.
3
Remove the tray panel.
4
Set the test disc.
5 Press the h OPEN/CLOSE button to close the tray.
(Test disc is clamped.)
6 Press the u STANDBY/ON button to turn off the
power.
7
Pull out the Power cord.
How to open the tray when the power cannot be on
1. Slide the rack, loading (White) toward the arrow direction by using a minus screwdriver to release the lock.
2. Manually open the tray.
NOTE:
Please strongly pushing rack, loading (White) to release the lock because the tray doesn't go out easily.
Tray open
5
6
Test disc
2
Minus screwdriver
Bottom view
XV-DV575
6
7
4
3
Tray
5
Tray panel
7
8
2 5
1 6
Rack, loading (White)
8
A
B
C
D
E
F
33