View Bmc System Event Log; Ip Address Source - Supermicro 2042G-72RF4 User Manual

A+ SERVER 2042G-72RF4 USER'S MANUAL
ACPI APIC Support
Determines whether to include the ACPI APIC table pointer in the RSDT pointer
list. The available options are Enabled and Disabled.
Headless Mode
Use this setting to enable or disable headless operation mode through ACPI.
WHEA Support
Use this setting to enable or disable Windows Hardware Error Architecture.
NUMA Support
This setting Enables or Disables the building of an ACPI SRAT Table.
 IPMI Configuration
This menu shows static information about the IPMI firmware revision and status
of the BMC, as well as options for IPMI configuration.
 View BMC System Event Log
Pressing the Enter key will open the following settings. Use the "+" and "-" keys
to navigate through the system event log.
Clear BMC System Event Log
Selecting this and pressing the Enter key will clear the BMC system event log.
 Set LAN Configuration
Use the "+" and "-" keys to choose the desired channel number. This displays
Channel Number and Channel Number Status information.
 IP Address Source
This submenu sets the IP address source as either Static or DHCP. Selecting
Static allows you to manually set the IP Address, Subnet Mask and Gateway
Address.
In the field provided here enter the IP address in the decimal form of xxx.xxx.
xxx.xxx with xxx having a value of less than 256 and in decimal form only The
IP address and current IP address in the BMC are shown.
7-14