Advertisement
•
Beep until button press—The System Remote Control beeps until
you press one of its buttons.
•
Beep for X seconds (<254)—The System Remote Control beeps
until X seconds have elapsed, or you press one of its buttons.
•
Stop Beep—The System Remote Control stops beeping.
Regulatory Compliance
FCC
FCC ID: R33C4SR250Z
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT! Changes or modifications not expressly approved by
Control4 could void the user's authority to operate the equipment.
Important ! Les changements ou les modifications pas
expressément approuvés par Control4 ont pu vider l'autorité de
l'utilisateur pour actionner l'équipement.
Wichtig! Die änderungen oder änderungen nicht ausdrücklich
genehmigt durch Control4 konnten die Berechtigung des Benutzers
aufheben, um die Ausrüstung laufen zu lassen.
Industry Canada
Canadian ID: 7848A-C4SR250Z
This Class B digital apparatus complies with Canada ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Australian/New Zealand Compliance
•
AS/NZS 4268:2003 + A1:2005 & A2:2006.
CE Declaration of Conformity
European Contact Information
United States Contact Information
Control4 UK Limited Unit 3,
Control4 Corporation
Green Park Business Centre Sutton-
11734 S. Election Road,
on-the-Forest, York YO61 IET,
Suite 200
United Kingdom
Salt Lake City, UT 84020-6432,
+44 (0) 134781 2300
USA Tel (801) 523-3100
c4@control4-UK.com
Product: System Remote Control, Model No: C4-SR250-Z-B
The undersigned hereby declares, on behalf of Control4 Corporation, that
the above-referenced product, to which this declaration relates, is in
conformity with the provisions of:
•
Council Directive 89/336/EEC (May 3, 1989) on Electromagnetic
Compatibility
•
Council Directive 1999/5/EC (Mar 9, 1999) on Radio & Telecommu-
nication Terminal Equipment (R&TTE)
•
Council Directive 73/23/EEC (Feb 19, 1973) on Low Voltage Equip-
ment Safety
•
Council Directive 93/68/EEC (Jul 22, 1993) Amending Directives 89/
336/EEC and 73/23/EEC
and has been tested to the requirements of, and shown to be in compliance
with, the following requisite standards:
•
EN 55022: 2006 Information Technology Equipment, Class B.
•
EN 55024:1998+A1+A2 Information technology equipment - Immu-
nity characteristics - Limits and methods of measurement.
•
EN 300 328-2 V1.4.1 — Wide band transmission systems; data
transmission equipment operating in the 2.4GHz ISM band. Harmo-
nised EN covering essential requirements under Article 3(2) of the
R&TTE Directive.
The Technical Construction File required by these Directives is maintained at
the corporate headquarters of Control4, Salt Lake City, Utah, U.S.A.
Signed, Brett Molen—Vice President, Engineering, August 27, 2008
Recycling
For information on recycling, please go to www.control4.com/
recycling
Limited 2 Year Warranty
This device has a limited two (2) year warranty on parts from the date of
purchase. Control4 will replace or repair any defective unit. Return unit to the
place of purchase for replacement. For any damages incurred, the warranty
will never exceed the purchase price of the device. This warranty does not
cover installation, removal, or reinstallation cost. The warranty is not valid in
cases where damage was incurred due to misuse, abuse, incorrect repair, or
improper wiring or installation. It does not cover incidental or consequential
damage. This warranty gives you specific legal rights, and you might also be
entitled to other rights that vary from state to state. Some states do not allow
limitations on how long an implied warranty lasts or the exclusion or limitation
of incidental or consequential damages. In these cases, the above
mentioned limitations might not apply to you. For complete warranty
information, see http://www.control4.com/dealer/
About this Document
©2009 Control4. All rights reserved. Control4, the Control4 logo and
Everyday Easy are registered trademarks or trademarks of Control4
Corporation in the United States and/or other countries. All other names or
brands may be claimed as property by their respective owners. Pricing and
specifications subject to change without notice.
Part Number: 200-00071 Rev C 5/13/2009
Advertisement
