Hollis DG03 Reference

OPERATING MODES

• There are 3 Modes of operation - NORM (Air or Nitrox), GAUG (no Ni-O2), and FREE (no Ni-O2 or Pressure)
• Dive Mode - if Wet Activation is set Off, you must Activate the DG03 prior to the first dive of a series
• SmartGlo Backlight - press S.
• NORM/GAUG display Times as hr:min, FREE displays Times as min:sec (NDC as hr:min), and Time of Day is always hr:min.
• To Select the Operating Mode to be used, press/release M while the Mode graphic (NORM, GAUG, or FREE) is flashing.
M (2 sec)
NORM SURF MAIN
(< 2 sec)
SURF ALT
DESAT TIME
NORM/GAUG SURF >> DG03 & TMT Battery/Pressure Status (to access and scroll through, press S 2 sec)
NORM/GAUG SURF >> SET F >> SET A >> SET U >> SET T
• to access & step through, press both A & S (2 sec).
SET F (FO2/PO2 Alarms) >> GAS >> GAS 2 >> GAS 3 >> FO2 DEFAULT
• to step through, press A (< 2 sec).
SET A >> AUD >> DEPTH >> EDT >> NIBG* >> DTR >> TURN >> END
• to step through, press A (< 2 sec).
SET U >> WET >> UNITS >> DS* (RUN TIMER**) >> SS* >> CF* >> GLOW >> SAMPLING >> TMT1, 2, 3
• to step through, press A (< 2 sec).
SET T >> 12/24 >> HOUR >> MINUTE >> YEAR >> MONTH >> DAY
• to step through, press A (< 2 sec).
FREE SURF >> ALT1 (Temp/Time) >> ALT2 (Last EDT, Max Depth)
• to access & step through, press A (< 2 sec).
FREE SURF >> CDT Status >> SET MINUTES >> SET SECONDS
• to access, press A (2 sec); to set press both A & S (2 sec).
FREE SURF >> EDT Alarm > DEPTH Alarm 1 >> DEPTH Alarm 2 >> DEPTH Alarm 3
• to access, press both A & S (2 sec); to step through, press A (< 2 sec).
A (< 2 sec)
to ALT
GAUG SURF MAIN
A
NORM PLAN
A
(< 2 sec)
LOG PREVIEW
M (2 sec)
FREE SURF MAIN
A
(< 2 sec)
TIME to FLY
A
(< 2 sec)
HISTORY MODE
* NORM only.
** GAUG only.
DG03
Reference
M (2 sec)
to
NORM
min:sec
A
to
SAT
(< 2 sec)
A
to
(< 2 sec) MAIN
M A
FULL LCD
Read and Understand
the Operating Manual
S