Removing Range For Cleaning And Servicing; Broiler Drawer - Maytag CRG8400AAL Manual

Removing Range for Cleaning Broiler Drawer
and Servicing
Store a clean broiler pan and insert in the broiler
drawer.
When necessary, follow these procedures to
remove the appliance for cleaning or servicing:
To Remove the Drawer
1. Shut offthe gas supply" to the appliance.
Pull the drawer out to the first stop position. Lift
2. Disconnect the eleetrieal supply to the up the front of the drawer and pull it to the
appliance, second stop position. Grasp the sides and lift up
3. Disconnect the gas supply- tubing to the mad out to remove the drawer.
appliance.
4. Slide the range forward to disengage the
To Replace the Drawer
range from the anti-tip bracket. (See the Fit the ends of the drawer glides onto tile rails.
Installation Instructions for location of the Lift up the drawer front and gently push in to
bracket.) the first stop position. Lift up the drawer again
,5. Beverse tile procedure to reinstall. If the gas and continue to slide the drawer to the closed
line has been disconnected, cheek for gas position.
leaks after reconneetion. (See the Installation
Instructions for the gas leak test method.)
PAGE 23