Table of Contents
Advertisement
MAINTENANCE
Electrical
Connection
W_'_VING:
To reduce the risk ofaccideninl
Upping
of the range, it must be secured by"a
Appliances which require electrical power are
properly installed anti-tip device. To check if the
equipped with a three-prong grounding plug
devine is installed properly; use a flashlight and
which must be plugged directly into a properly
look underneath
the range to see that one of the
grounded three-hole I20 volt electrical outlet,
rear leveling legs is engaged in the bracket slot,
If an ungrounded, two-hole or other type
The anti-tip device secures the rear leveling leg
electrical outlet is encountered,
it is the
ro the floor, if properly engaged.
personal responsibility
of the appliance
owner to have receptacle
replaced with a
properly grounded
three hole electrical
Light Replacement
outlet. The three-prong grounding plug is
Before replacing the light bulb, disconnect
the
provided for protection against shock hazards,
power to the range. Be sure the bulb is cool
Do not cut or remove the third grounding
Do not touch a hot bulb with a damp cloth as the
prong from the power cord plug.
bulb may break.
To Replace
Panel Light
Grasp the top trim of the backpanel with your
)_
thumbs under the front edge and pull outward
while lifting to release the trim from the catches
_
at each end. Remove the bulb and replaee it with
,.
_-4
_3
an 18 watt fluorescent tube. Snap the top trim
back into place and restore the power. Reset the
,
eloek to the current time-of-day.
/
Always
disconnect
power
to appliance
before servicing.
_
_'L ....
_ _
Leveling
Legs
Some floors are not level. For proper baking,
your range must be level. The leveling legs are
located on each comer of the base of the range.
Level the range by turning the legs.
/
N
PAGE 21
Advertisement
Table of Contents
