Chapter 3: System Setup
Installing a 2.5" SATA Hard Drive
Please correctly follow the below instructions and
CAUTION!
CAUTION!
CAUTION!
noted items to avoid making unnecessary damages.
1. Remove the mounting screws that secure the hard drive bracket to the chassis.
Mounting screw
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
2. Note the sides of the hard drive bracket. The longer side is designed to
fit on the chassis' standoff while the shorter side is designed to fit on the
motherboard's standoff.
Longer side
Longer side
24
3.5" Bracket
Shorter side
2.5" Bracket
Shorter side
NSA 5160 User Manual