Nexcom NSA 5160 User Manual page 71

Chapter 4: BIOS Setup
BMC Network Configuration
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Main Advanced IntelRCSetup
--BMC network configuration--
*********************
Configure IPV4 support
*********************
Lan channel 1
Configuration Address [Unspecified]
Current Configuration DynamicAddressBmcDhcp
Station IP address 0.0.0.0
Subnet mask 0.0.0.0
Station MAC address 00-00-00-00-00-00
*********************
Configure IPV6 support
*********************
Lan channel 1
IPV6 is not supported in BMC.
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Configuration Address
Select to configure LAN channel parameters statically or dynamically (by BIOS
or BMC). Unspecified option will not modify any BMC network parameters
during BIOS phase.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Server Mgmt Security Boot Save & Exit
Select to configure LAN
channel parameters statically
or dynamically(by BIOS or
BMC). Unspecified option will
not modify any BMC network
parameters during BIOS phase
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
View System Event Log
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Main Advanced IntelRCSetup
No. of log entries in SEL : 0
<< System Event Log is Empty >>
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Displays system event log information including date, time and sensor type.
56
Server Mgmt Security Boot Save & Exit
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
NSA 5160 BIOS Manual