Nexcom NSA 5160 User Manual page 51

Chapter 4: BIOS Setup
Serial Port 2 Configuration
This section is used to configure serial port 2.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
Serial Port 2 Configuration
Serial Port [Enabled]
Device Settings IO=2F8h; IRQ=3;
Change Settings [Auto]
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Serial Port Console Redirection
This section is used to configure the serial port that will be used for console
redirection.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Console Redirection (COM0/COM1/EMS)
Enables or disables console redirection for COM0/COM1/EMS.
36
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
COM0
[Enabled]
Console Redirection
► Console Redirection Settings
COM1
Console Redirection [Disabled]
► Console Redirection Settings
Legacy Console Redirection
► Legacy Console Redirection Settings
Serial Port for Out-of-Band Management /
Windows Emergency Management Services (EMS)
Console Redirection [Enabled]
► Console Redirection Settings
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Console Redirection Enable
or Disable
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
NSA 5160 BIOS Manual