1. Manuals
  2. Brands
  3. Nexcom Manuals
  4. Firewall
  5. NSA 3111 Series
  6. User manual

Nexcom NSA 3111 Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NEXCOM International Co., Ltd.
Network and Communication Solutions
Network Security Appliance
NSA 3111
User Manual
NEXCOM International Co., Ltd.
Published August 2010
www.nexcom.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NSA 3111 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Nexcom NSA 3111 Series

Summary of Contents for Nexcom NSA 3111 Series

  • Page 1 NEXCOM International Co., Ltd. Network and Communication Solutions Network Security Appliance NSA 3111 User Manual NEXCOM International Co., Ltd. www.nexcom.com Published August 2010...

  • Page 2: Table Of Contents

    Internal Connectors ................16 Hardware Specifications ................2 Reset Button ..................16 NSA 3111 System .................2 Power Button .................16 Main Board (NSB 3111) ................4 VGA Connector ................17 PS/2 Keyboard/Mouse Connector ...........17 Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 3 Using the Control Keys .................43 BIOS Setup Utility ..................44 Standard CMOS Features ..............44 Advanced BIOS Features ..............47 Integrated Peripherals .................49 Power Management Setup ..............53 PnP/PCI Configurations ...............55 Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 4: Preface

    NEXCOM shall not be liable for direct, indirect, special, incidental, or interference to radio communications. Operation of this equipment in a...

  • Page 5: Rohs Compliance

    0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, NEXCOM has established an engineering and manufacturing task force in to implement the introduction of green products. The task force will ensure that we follow the standard...

  • Page 6: Warranty And Rma

    ? Replace with 3rd party products if needed. the RMA number apply process. ? If RMA goods can not be repaired, NEXCOM will return it to the cus- tomer without any charge. ? Customers can send back the faulty products with or without acces- sories (manuals, cable, etc.) and any components from the card, such as...

  • Page 7: Safety Information

    There is a danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufactur- er. Discard used batteries according to the manufacturer’s instructions. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 8: Safety Precautions

    11. All cautions and warnings on the equipment should be noted. 19. The computer is provided with CD drives that comply with the ap- propriate safety standards including IEC 60825. viii Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 9: Technical Support And Assistance

    Technical Support and Assistance Conventions Used in this Manual Warning: Information about certain situations, which if not 1. For the most updated information of NEXCOM products, visit NEX- observed, can cause personal injury. This will prevent injury to COM’s website at www.nexcom.com.

  • Page 10: Global Service Contact Information

    Z.I. des Amandiers, 17, Rue des entrepreneurs Tel: +44-1908-267121 78420 Carrières sur Seine, France Fax: +44-1908-262042 Tel: +33 (0)1 71 51 10 20 http://www.nexcom.eu Fax: +33 (0)1 71 51 10 21 http://www.nexcom.eu Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 11 Fax: +86-25-8324-9685 http://www.nexcom.cn China-Shenzhen Office Western Room 708, Block 210, Tairan Industry & Trading Place, Futian Area, Shenzhen, China 518040 TEL: +86-755-833 27203 FAX: +86-755-833 27213 http://www.nexcom.cn Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 12: Package Contents

    P3x6 iso/SW6x0.5 NI LONG FEI:P3x6L 5043330272X00 TP10 CF BRACKET CHYUAN-JYH:L10Z361 46.4x49.2x8.8mm 301 STAINLESS STELL T:0.5mm 60233ATA16X00 SATA CABLE BEST:109-0707-100R SATA FEMAIL 7PIN CONNECTROR(PH1.27) L:100mm 19S00311101X0 NSA3111-C6 ASSY Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 13: Ordering Information

    , 2 DDR2 ® ® ® memory slots, 4 Gigabit LAN ports, Compactflash socket, VGA, USB port, One PCI Expansion slot, One LAN Modular support (optional) xiii Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 14: Chapter 1: Product Introduction

    • One Mini PCI expansion slot 1MB/2MB cache • Two internal 2.5” HDD bays (optional) • Two DIMM sockets support DDR2 800 Dual Channel with Non-ECC memory, maximum of 4GB Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 15: Hardware Specifications

    - Suction from the side and discharged to the back I/O Interface - Front • Console port - One RJ45 type • USB port - Two USB ports Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 16 • 2/4KV contact discharge - -20 C ~ 75 • 2/4/8KV air discharge • Relative humidity • Criteria A - 10%~90% non-condensing Safety • UL • LVD Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 17: Main Board (Nsb 3111)

    - 4GB maximum memory Graphics • Controller - G41 integrated VGA controller • Interface - CRT port resolution up to 1024x768 60Hz, box header 2x8 2.0mm Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 18 • Type - One PCI expansion - Award BIOS • Flash ROM - 8Mbit (SPI) • Power Management - Power voltage monitoring • PXE - 82574L Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 19 • Relative humidity - 10%~90% non-condensing • EMI/EMC - CE - FCC Class A • ESD - 2/4KV contact discharge - 2/4/8KV air discharge - Criteria B Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 20: Getting To Know Nsa 3111

    Used to connect USB 2.0/1.1 devices. Used for installing a LAN module. Power LED Indicates the power status of the system. HDD LED Indicates the status of the hard drive. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 21: Rear Panel

    Power On/Off Switch Press to power-on or power-off the system. Expansion Slot Used to install expansion cards. System Fans Cooling fans to dissipate heat from the system. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 22: Chapter 2: Jumpers And Connectors

    Static electricity can damage many of the elec- • Use correct screws and do not over tighten screws. tronic components. Humid environment tend to have less static electric- Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 23: Jumper Settings

    (on) and open (off). Two-Pin Jumpers: Open (Left) and Short (Right) Three-Pin Jumpers: Pins 1 and 2 Are Short Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 24: Jumpers

    Connector location: JP1 Definition Settings 1-2 On 1-2 On Normal 2-3 On 2-3 On CMOS Clear 2-3 On: default 1-2 On: default Definition Battery 3.3V RTCRST# Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 25: Console Type Select

    Connector location: JP3 Connector location: JP3 Definition Definition 1-2 On RTS to CTS 1-2 On Master 2-3 On Normal 2-3 On Slave 2-3 On: default 1-2 On: default Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 26: Connectors Pin Definitions

    GPIO Software Button RJ45 Type Console Port Connector type: 2-pin jack Connector type: RJ45 port Connector location: SW1 Connector location: LAN1 Definition Definition Definition RTS / CTS GPI12 Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 27: Usb Ports

    Connector location: LED1 Connector location: USB1 Bypass B1 Bypass B2 Definition Definition Status LED Color USB1_N USB2_N Green USB1_P USB2_P Yellow Bypass B1 Yellow Bypass B2 Yellow Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 28: Copper Lan Ports

    Link Status Yellow Data Activity Green 1G and Blinking Always Lighted 10/100MB No Acitivity No link Definition Definition TX+0 TX-0 TX+1 TX+2 TX-2 TX-1 TX+3 TX-3 Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 29: Internal Connectors

    Connector type: 1x2 2-pin header, 2.54 mm pitch Connector type: 1x2 2-pin header, 2.54 mm pitch Connector location: J3 Connector location: J4 Definition Definition RESET FP_SW_ON_N Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 30: Vga Connector

    Connector type: 2x4 8-pin header, 2.54 mm Connector location: CN1 Connector location: J2 Definition Definition Definition Definition GREEN KDAT MDAT BLUE KCLK MCLK VGADATA HSYNC VSYNC VGACLK Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 31: Com2 Connector

    Connector type: Standard Serial ATAII, 1.27mm Connector location: CN2 Connector location: J8 and J9 Definition Definition DCD2 RXD2 TXD2 DTR2 Definition DSR2 RTS2 CTS2 TXP0 TXN0 RXN0 RXP0 Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 32: Gpio Connector

    Connector type: 1x6 6-pin boxed header, 2.0 mm JST Connector location: J7 Connector location: J1 Definition Definition Definition GPI20 GPO24 USB2- GPI21 GPO25 USB2+ GPI22 GPO26 USB3- GPI23 GPO27 USB3+ Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 33: Chip Fan

    Connector type: 3-pin Wafer, 2.54 mm pitch Connector size: 4-pin Wafer, 2.54 mm pitch Connector location: FAN1 Connector location: CN3 and CN4 Definition Definition +12V FAN_TAC +12V FAN_TAC Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 34: Dimm Sockets

    • DIMM 2 = Channel B DIMM 1 = Channel A • Always populate DIMM1 first. The system will not boot when the first module is installed in DIMM2. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 35: Compactflash

    SIORDY SDREQ SDDACK# IDEACTP# DIAG# Description Description SDD8A SDD9A SDD3A SDD10A SDD4A SDD5A SDD6A SDD7A SDCS#1 SDA2A SDA1A SDA0A SDD0A SDD1A SDD2A CF_CD2# CF_CD1# SDD11A SDD12A Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 36: Block Diagram Of The Main Board

    Chapter 2: Jumpers and Connectors Block Diagram of the Main Board Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 37: Chapter 3: System Setup

    1. The screws around the cover are used to secure the cover to the chas- sis. Remove these screws and put them in a safe place for later use. The dots denote the locations of the screws. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 38: Installing A Dimm

    • DIMM1 = Channel A DIMM2 = Channel B • Always populate DIMM1 first. The system will not boot when the first module is installed in DIMM2. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 39 Notch on the module Key on the socket Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 40: Installing The Cpu

    • The CPU socket must not come in contact with anything other than the CPU. Avoid unnecessary exposure. Remove the protec- tive cap only when you are about to install the CPU. socket Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 41 Chapter 3: System Setup 3. Lift the load lever. 4. Lift the load plate. Retention tab Load plate Load lever lifted Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 42 Do not force the CPU into the socket. Forcing the CPU into the socket may bend the pins and damage the CPU. Pin 1 of the socket Handle the CPU by its edges and avoid touching the pins. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 43 When you later place the heat sink on top of the CPU, the compound will disperse evenly. Load plate Thermal paste on the CPU Load lever Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 44 Align the mounting screws of the heat sink with the mounting holes around the CPU socket. Tighten the screws to secure the heat sink in place. Mounting hole Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 45: Installing A Compactflash Card

    1. Locate for the CompactFlash socket on the board. 2. With the CompactFlash card’s label facing up, position the card to the socket. CompactFlash card CompactFlash socket Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 46 Chapter 3: System Setup 3. Insert the card until it is completely seated in the socket. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 47: Installing A Sata Hard Drive

    Use the provided mounting screws to secure the SATA drive in place. Drive bay Mounting Mounting screw screw Connector side of SATA drive Mounting screw Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 48 3. Align the mounting holes of the drive bay with the mounting studs on 4. Connect the SATA power cable and the SATA data cable to the SATA the chassis. drive. SATA power SATA data cable cable Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 49 Chapter 3: System Setup 5. Use the mounting screws you removed in step 1 to secure the drive bay in place. Mounting screw Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 50: Installing A Pci Card

    2. Remove the mounting screws that secure the L-shaped bracket to the 1. The PCI slot is attached on an L-shaped bracket. chassis. Mounting screw L-shaped PCI slot bracket Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 51 4. Align the PCI card with the PCI slot then push it firmly until it is com- pletely seated in the slot. PCI slot PCI card Slot cover Mounting screw Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 52 5. Secure the card with the screw you removed in step 3. Mounting screw 6. Install the bracket back into the chassis then secure the bracket with the mounting screws you removed in step 2. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 53: Chapter 4: Bios Setup

    BIOS is updated in the future. Setup options, and second, to make settings appropriate for the way you use the computer. To check for the latest updates and revisions, visit the NEXCOM Web site at www.nexcom.com.tw. When to Configure the BIOS...

  • Page 54: Entering Setup

    ↑ ↓ → ← F10 : Save & Exit Setup TO ENTER SETUP BEFORE BOOT Time, Date, Hard Disk Type... PRESS <CTRL-ALT-ESC> Press the <Del> key to enter Setup: Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 55: Getting Help

    Save & Exit Setup Saves CMOS value changes to CMOS and exits setup Exit Without Saving Ignores all CMOS value changes and exits setup. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 56: Using The Control Keys

    Increase the numeric value or make changes PgDn/minus key Decrease the numeric value or make changes F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 57: Bios Setup Utility

    24-hour military-time clock. For example, 1 p.m. is 13:00:00. Hour displays hours from 00 to 23. Minute displays minutes from 00 to 59. Second displays seconds from 00 to 59. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 58 Sector The system boot will not stop for a keyboard error; it will stop for all other errors. This field displays the number sectors per track. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 59 Displays the total memory available in the system. Model Name Displays the model name of the main board. BIOS Version Displays the current BIOS version used. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 60: Advanced Bios Features

    ↑↓→← F7: Optimized Defaults F5: Previous Values : Move PU/PD/+/-: Change Priority F10: Save ESC: Exit ↑↓ F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 61 If BIOS serial console redirection is enabled, this option allows you to change the console speed. Available baud rate options include 9600 (de- fault), 19200, 38400, 57600, and 115200. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 62: Integrated Peripherals

    The block size will depend on the type of hard disk drive. Disabled The IDE HDD uses the standard mode. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 63 This option automatically sets the SATA drives to Primary Master mode. Since the SATA drives are in Master mode, you cannot set the IDE drive to Master mode. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 64 If a PS/2 keyboard is not available and you need to use a USB keyboard to install Windows (installation is performed in DOS mode) or run any program under DOS, set this field to Enabled. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 65 ByPass Mode After PWR-ON The options are All Enable, All Disable and By Segment. ByPass Mode After PWR-OFF The options are All Enable, All Disable and By Segment. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 66: Power Management Setup

    ACPI. : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help ↑↓→← F5: Previous Values F7: Optimized Defaults Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 67 Pushing the power button for more than 4 seconds will power off the system. Instant-Off Pressing and then releasing the power button at once will immediately power off your system. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 68: Pnp/Pci Configurations

    The BIOS will not reset the configuration data. : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help ↑↓→← F5: Previous Values F7: Optimized Defaults Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 69: Pc Health Status

    If you only want to install setup defaults for a specific option, select and display that option, and then press the <F7> key. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 70: Set Password

    (jumper cap) on the RTC Clear jumper to short pin 2 and pin 3 for five seconds, then putting the shunt back to pin 1 and pin 2. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 71: Exit Without Saving

    Time, Date, Hard Disk Type... Selecting this option and pressing <Enter> will exit the Setup utility with- out recording any new values or changing old ones. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 72: Appendix A: Watchdog Timer

    0x02 time-out occurs after 2 sec./min. CRF7[4]. pin 89 will fall at the same time. 0x03 time-out occurs after 3 sec./min. 0xFF time-out occurs after 255 sec./min. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 73 ;SET UNITS ;######################################################### DX, 2EH AL, 0F5H DX, AL AL, DX AL, NOT 8 ;SECEND MODE. DX, AL ;######################################################### ;SET TIME OUT VALUE ;######################################################### DX, 2EH Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 74: Appendix B: Gpi/O Programming Guide

    GPIO (J7) Pin 3 Pin 5 Pin 7 Pin 9 Pin 4 Pin 6 Pin 8 Pin 10 GPIN10 GPIN11 GPIN12 GPIN13 GPOUT14 GPOUT15 GPOUT16 GPOUT17 Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 75 ;Select logical device (GPIO1). ;######################################################### ;######################################################### out 2eh, 0f1h out 2eh, 07h in 2fh out 2fh, 07h ;######################################################### ;Activate GPIO Function. ;######################################################### out 2eh, 30h out 2fh, 01h ;######################################################### Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 76 Appendix B: GPI/O Programming Guide Read GPI12 Sample Code mov dx,48Dh in al,dx and al,10h ;now al (bit4) is GPIO12 value. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 77: Appendix C: Bypass Specifications

    Bit 3: Segment 4 (facing the front panel, the fourth from the left is the 4th 101 - 16 second Bypass) 110 - 32 second 111 - 64 second Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...
  • Page 78 Bit 3: Segment 4 (facing the front panel, the fourth from the left is the 4th Bypass) 0 - Set segment bypass Disable when power off 1 - Set segment bypass Enable when power off Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 79: Appendix D: Power Consumption

    A Mini PCI Add-in card must limit its total power consumption to 2 Watts from all power rail. A PCI Add-in card must limit its total power consumption to 25 Watts from all power rail. Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

  • Page 80: Total Power Requirements

    Consumed currents (Item A ) 12.4 18.9 13.6 Actually required currents (Item A / 0.8) 15.5 23.6 Maximum BTU (Power Supply Watt * 3.412) 984 BTU/hr Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. NSA 3111 User Manual...

This manual is also suitable for:

Nsa 3111-c6Nsa 3111-c4

Table of Contents