Chapter 3: System Setup
Installing a SATA Hard Drive
1. Remove the mounting screws that secure the drive bay to the chassis.
Drive bay
Mounting
screw
Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved.
2. Place the SATA hard drive onto the drive bay. Align the mounting holes
that are on the sides of the SATA drive with the mounting holes on the
drive bay. Use the provided mounting screws to secure the SATA drive
in place.
Mounting
screw
34
Mounting screw
Drive bay
Connector side of
SATA drive
NSA 3111 User Manual