Server Mgmt - Nexcom NSA 5160 User Manual

Chapter 4: BIOS Setup

Server Mgmt

Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Main Advanced IntelRCSetup
BMC Self Test Status PASSED
BMC Device ID 32
BMC Device Revision 1
BMC Firmware Revision 0.72
IPMI Version 2.0
BMC Support [Enabled]
Wait For BMC [Enabled]
System Event Log

BMC network configuration

View System Event Log

BMC User Settings

BMC Warm Reset
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
BMC Support
Enables or disables interfaces to communicate with BMC.
Wait for BMC
Enables or disables waiting for BMC.
BMC Warm Reset
To perform a BMC warm reset, select this field then press <Enter>.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Server Mgmt Security Boot Save & Exit
Enable/Disable interfaces to
communicate with BMC
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
System Event Log
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Main Advanced IntelRCSetup
Enabling/Disabling Options
SEL Components
Erasing Settings
Erase SEL
When SEL is Full
Custom EFI Logging Options
Log EFI Status Codes
NOTE: All values changed here do not take
until computer is restarted.
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
SEL Components
Enables or disables all the features of system event logging during boot.
Erase SEL
Configures the options for erasing SEL.
When SEL is Full
Configures the action to perform when SEL is full.
Log EFI Status Codes
Configures the options for logging EFI status codes.
55
Server Mgmt Security Boot Save & Exit
Change this to enable or disable
all features of System Event
[Enabled]
Logging during boot.
[No]
[Do Nothing]
[Error code]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
NSA 5160 BIOS Manual