Download Print this page

Renesas MCU Board M30850T2-EPBM User Manual page 2

Mcu board

Advertisement

1. Outline
The M30850T2-EPBM is an MCU board for replacing the emulation probe M30850T2-EPB and the compact emulator
M30850T3-CPE for the M32C/80, 84, 85, 86 and 8A Groups, or the compact emulator M30850T2-CPE for the M32C/84, 85 and 86
Groups.
2. Components
Package components
M30850T2-EPBM MCU board for replacing the M30850T2-EPB, the M30850T3-CPE and
the M30850T2-CPE
M30850T2-EPBM User's manual (This manual)
M30850T2-EPBM User's manual (Japanese)
3. Replacing the MCU Board
How to replace the MCU board is shown in Figure 3.1.
Figure 3.1 Replacing the MCU board
4. Applicable Emulator Debugger for this product
[M30850T2-EPB]
(1) M32C PC7501 emulator debugger V.1.00 Release 00 or later
(2) M3T-PD308F V.3.20 Release1 or later
[M30850T2-CPE]
(1) M32C compact emulator debugger V.1.00 Release 01 or later
(2) M3T-PD308MF V.1.00 Release01 or later
[M30850T3-CPE]
(1) M32C compact emulator debugger V.1.02 Release 00 or later
Description
(1) Unscrew the four screws included with the M30850T2-EPB, the
PCA7501EPBA or
(2) Pull out the M30850T2-EPBM from the PCA7501EPBA of the
M30803T2-CPEA
M30850T2ーEPBM
Screw x4
(3) Attach the new M30850T2-EPBM to the PCA7501EPBA of the
PCA7501EPBA or
M30803T2-CPEA
M30850T2-EPBM
(this product)
(4) Tighten the four screws in an even, crisscross pattern to secure the
(5) After replacing the board, perform the self-check to make sure that it
M30850T3-CPE or the M30850T2-CPE.
M30850T2-EPB,
or
from
M30850T3-CPE or the M30850T2-CPE. Note that pull them out
vertically, otherwise the connectors may be damaged.
M30850T2-EPB, or to the M30803T2-CPEA of the M30850T3-CPE
or the M30850T2-CPE. The connecting directions are as follows
-With the M30850T2-EPB
PCA7501EPBA J3 connector to M30850T2-EPBM J1 connector
PCA7501EPBA J4 connector to M30850T2-EPBM J2 connector
-With the M30850T3-CPE or the M30850T2-CPE
M30803T2-CPEA J3 connector to M30850T2-EPBM J1 connector
M30803T2-CPEA J4 connector to M30850T2-EPBM J2 connector
new M30850T2-EPBM with a screwdriver.
has been installed properly. For details on the self-check, refer to the
user's manual of each product.
(2/3)
Quantity
1
1
1
the
M30803T2-CPEA
of
the

Advertisement

loading