Capacity And Draw Stud Selection Guide - Greenlee Intelli-PUNCH Operation Manual

Capacity and Draw Stud Selection Guide

Slug-Splitter and Large Diameter Punches / Draw Studs
Steel Gauge
10 ga. (0.134", 3 mm)
12 ga. (0.104", 2.5 mm)
14 ga. (0.074", 2 mm)
Steel Gauge
10 ga. (0.134", 3 mm)
12 ga. (0.104", 2.5 mm)
14 ga. (0.074", 2 mm)
Electronic Connector Punches
Steel Gauge
16 ga. (0.0598", 1.5 mm) 33967 adapter, 1924AA spacer
Key
Item
Catalog No.
A 20963
B 2113B
C 29451
D 29452
E 1924AA
F 1557AA
G 1557SS
Greenlee / A Textron Company
Find Quality Products Online at:
STAINLESS STEEL
PIPE AND CONDUIT SIZE
1/2" 3/4" to 1-1/4"
C, E D, E
MILD STEEL
Standard and Slug-Buster Punches / Draw Studs
PIPE AND CONDUIT SIZE
1/2" 3/4" to 1-1/4"
A, E B, E
MILD STEEL
RS232, 229, 231, 234, 238
Draw Stud and Hardware
Description
3/8" x 4.8" draw stud
3/4" x 5.38" draw stud
7/16" x 4.25" draw stud (stainless steel)
3/4" x 5.5" draw stud (stainless steel)
7/8" spacer
1-1/8" x 3" punch sleeve
1-1/8" x 3" punch sleeve (stainless steel)
GlobalTestSupply
www.
Intelli-PUNCH™ Knockout Driver
1-1/2" to 3" 3-1/2" to 4"
N/A
D
D, G
1-1/2" to 3" 3-1/2" to 4"
B B, F
12
.com
5" to 6"
N/A
B, F
sales@GlobalTestSupply.com