Case Removal From Skid [Levelers Or Casters] - Oasis CO34R Installation And Operating Manual

CASE REMOVAL FROM SKID [LEVELERS OR CASTERS]

1. Removing Case Shipping Brackets That Are Attached To Skid

Remove screws holding Case Shipping Brackets to skid.

Remove Case Shipping Brackets from Skid.

See illustrations below. Note: Shipping Brackets will vary in size, shape, material and location
depending upon case type and model.
2. Remove Case (With Casters) From Skid
A. Place ramp up against skid (to allow case to
smoothly slide off from skid).
B. Maintain support of case at all times or center
of gravity may cause case to fall.
C. Unlock Casters. Slide unit to rear of skid.
Slide down ramp and off from skid.
Various Types Of
Case Shipping
Brackets
Ramp
6
Support case
while sliding
down ramp.