Refrigeration Fundamentals - Oasis CO34R Installation And Operating Manual

REFRIGERATION FUNDAMENTALS - PAGE 2 of 2
Hot Gas Condensate Unit

Assembly or disassembly and servicing must
be accomplished by licensed electrical /
refrigeration contractor.

Remove the front grille by lifting up and off.

Plastic glides are mounted to the unit base to
assist in sliding the condenser out for access.

Ensure that shipping screws have been removed.
Refrigerant
Line Loop
Filter Dryer
Sight Glass
Refrigerant
Line Loop
Support
Condenser Motor
And Fan
Overflow Evap. Pan
[Electric Coil] and
Electrical Box

Caution! Though refrigerant lines are flexible
to facilitate front access maintenance, do not
crimp or kink copper tubing while sliding
condenser unit out from under case!

Slide condenser unit forward approximately 12"
to access components.

Wicking material [optional] may be part of hot gas
loop serpentine coil.

After servicing or cleaning unit, carefully slide
condensing unit back under case.

Return front grille to case.
Condensate
Pan
Hot Gas
Serpentine Coil
13
Wicking Material
[Optional]
Compressor
and
Electrical Box