Accessing The Tool Kit; Replacing Or Installing Drives - HP Omen X Hardware Reference Manual

Accessing the tool kit

The tool kit contains the following:
Hard drive/power supply tool
●
Screwdriver/wrench, one side Phillips, one side hex. Hex screws are used on the graphics card and
●
system fans (radiators)
Screws
●
Pull the logo cover away from the case (1), and then disconnect the cable from the case (2). The tool kit is
located under the logo cover (3).

Replacing or installing drives

The case offers four hard drive bays.
The case supports three different drive types:
Accessing the tool kit 9