Advertisement
1. Outline
The M3T-FLX-80NRA is a converter board for connecting the
100-core flexible cable FLX100 to a foot pattern for 80-pin
0.8-mm-pitch QFP (80P6N-A).
2. Package Components
(1) M3T-FLX-80NRA converter board
(2) YQSOCKET080RAF (2 pieces) (made by Tokyo Eletech
Corporation)
(pre-mounted on the M3T-FLX-80NRA)
(3) YQPACK080RA (made by Tokyo Eletech Corporation)
(4) NQPACK080RA (made by Tokyo Eletech Corporation)
(5) YQ-GUIDE
(4
pieces)
Corporation)
(6) M3T-FLX-80NRA User's Manual (This manual)
3. Specifications
Table 1 Specifications
Applicable package
Insertion/removal
iterations of connector
4. Usage
The M3T-FLX-80NRA can be used for debugging and board
mounted
evaluation
in
NQPACK080RA on the target board.
(1) For debugging
Mount the NQPACK080RA and YQPACK080RA on the
foot pattern of the target board in that order. And connect
the probe tip of the emulator to the upper connector of the
M3T-FLX-80NRA. Then connect the YQPACK080RA
and the M3T-FLX-80NRA.
(2) For onboard evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK080RA168 (separately available)
or HQPACK080RA160 (separately available) in that order
on the NQPACK080RA on the target system.
Before using the M3T-FLX-80NRA, be sure to read "7.
Precautions" on page 4.
(made
by
Tokyo
Eletech
80P6N-A
(80-pin 0.8-mm-pitch QFP)
80P6U-A
(80-pin 0.8-mm-pitch LQFP)
20 times guaranteed
common
by
mounting
M3T-FLX-80NRA
NQPACK080RA
Figure 1 Package components of the M3T-FLX-80NRA
(1) Debugging
M3T-FLX-80NRA
YQ-GUIDE (x4)
YQPACK080RA
the
NQPACK080RA
80-pin 0.8-mm-pitch
(80P6N-A) foot pattern
Figure 2 Usage of the M3T-FLX-80NRA
(2/4)
YQPACK080RA
YQ-GUIDE (x4)
Probe of emulation pod
(2) Onboard evaluation
HQPACK080RA168
(separately available)
or
HQPACK080RA160
(separately available)
MCU with On-chip flash
memory or one-time PROM
: No. 1 pin
Be sure to align the pins.
Advertisement
