Timer; Standby Mode - Viking DrawerMicro VMOD5240 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

Control Panel and Settings
AUTO START
If you wish to program the DrawerMicro Oven to begin cooking automatically at a designated time of day, follow this
procedure.
1. Touch Setup/Help pad 4 times. The display shows
2. Touch Start/Add-A-Minute pad.
4:30
3. Enter start time.
4. Touch Timer/Clock pad.
5. Touch the number keys to enter cooking time.
Touch Power Level pad repeatedly until the desired power level is reached.
6. Touch Start/Add-A-Minute pad.
DEMONSTRATION MODE
TO SELECT DEMO MODE
1. Touch Setup/Help pad five times. The display shows
2. Hold Start/Add-A-Minute pad for 3 seconds. The display shows
TO CANCEL DEMO MODE
1. Touch Setup/Help pad five times. The display shows
2. Touch Start/Add-A-Minute pad. The display shows
NOTE:
• DrawerMicro Oven doesn't heat in Demo Mode.
• Display counts down quickly.

Timer

1. Touch Timer/Clock pad and number
2. Enter time.
3. Touch Timer/Clock pad again.
To cancel timer, touch Stop/Clear.

Standby Mode

This microwave will go into standby mode after a period of inactivity. The backlight of the display will automatically dim
after 3 minutes if the unit has not been in operation. If the display is in standby mode, simply touch the control panel or
open/close the door to return the backlight to maximum brightness.
E
AUTO
ENTER
START
TIME
TOUCH
CLOCK
ENTER
COOKING
TIME
20.00
DEMO ON?
DEMO
1
.
START
TOUCH
START
TOUCH
START
OR
TOUCH
TOUCH
HOLD
START
DEMO ON .
DEMO
OFF ?
TOUCH
START
OFF
22
POWER
LEVEL
START
3 SEC
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Drawermicro cvmod5240

Table of Contents