Air series Part e: Battery AirBM3V7L Docking station AirDOCK01 inDex Battery AirBM3V7L ....................2 1.1 Technical data ....................2 1.2 Plate ........................ 2 1.3 Warnings for battery usage ................3 1.4 First aid ......................3 1.5 Instructions for use ..................3 1.6 Storage ......................
Battery AIRBM3V7L Battery AirBM3V7L The A8 transmitting unit can only be powered through the battery AIRBM3V7L. Always close the battery inside the transmitting unit and fasten it with its cover and a screw: never use the transmitting unit if the battery is not fastened under the cover with a screw.
Battery AIRBM3V7L Warnings for battery usage Only use original Autec batteries and only recharge batteries with battery rechargers power supply units provided by Autec for this unit. never use damaged batteries. never use batteries if they have been dropped even just once.
Use of altered batteries or batteries that are not the original ones will void any warranty. Autec accepts no responsibility for any use that does not comply with the limitations and indications provided, and for any damage that may result from improper, incorrect or irrational use of the battery.
The crossed-out wheeled bin marked on batteries indicates that they must be disposed of separately from household waste, in conformity with the EU Directive 2006/66/EC and its amendments, and with local regulations. AUTEC - Air series LIAIREA0-01...
A8 transmitting units must only be charged through the docking station AIRDOCK01 and its adapter, (wall mounted FRA012-S05 or car mounted CLA05D-050A) provided by Autec together with the radio remote control. Use of a docking station and a power supply unit other than those provided will void the warranty.
(i.e. never leave the load suspended). When the A8 unit is being recharged in the docking station, the unit must not be used to control the machine, and the stop function is not available. AUTEC - Air series LIAIREA0-01...
Autec accepts no responsibility for any use that does not comply with the limitations and indications provided, and for any damage that may result from improper, incorrect or irrational use of the docking station and of the power supply unit.
Replace the battery with a Faulty battery working one. This signal appears if the A8 unit is in the docking station with the STOP pushbutton activated, and when you press the START pushbutton the luminous intensity significantly increases. AUTEC - Air series LIAIREA0-01...
Need help?
Do you have a question about the AIRBM3V7L and is the answer not in the manual?
Questions and answers