Table of Contents
Advertisement
Quick Links
NOTES
© Electromatic Equipment Co., Inc.
-12-
TABLE OF CONTENTS
1.0
....................................................................
2.0
............................................................
3.0
........................................................
3.1
3.2
4.0
5.0
6.0
...........................................................
7.0
8.0
................................................................
10.0
........................................................................
© Electromatic Equipment Co., Inc.
2
4
5
..............................
8
.........................................
8
9
.................................
9
10
11
-1-
Advertisement
Table of Contents
Related Manuals for ELECTROMATIC FS2
Summary of Contents for ELECTROMATIC FS2
- Page 1 Menu Keypad symbols Most common reasons for miss readings ……….……………..… Device maintenance instructions ………………………………..… Changing batteries ………………………………………………..… Determination of the material moisture …………………………… Technical data …………………………………………………….… 10.0 Warranty ……………………………………………………………… © Electromatic Equipment Co., Inc. © Electromatic Equipment Co., Inc. -12-...
- Page 2 Tel: 1-800-645-7330 / Tel: 516-295-4300 / Fax: 516-295-4399 under test using the buttons Every precaution has been taken in the preparation of this manual. Electromatic assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of information contained herein.
- Page 3 Digital scale 1000g Measuring cup 0.5 litre 4 x 1.5Volt AA Alkaline Batteries 12. Empty the humimeter and ensure that no grain rests are accumulated in the measuring chamber. © Electromatic Equipment Co., Inc. © Electromatic Equipment Co., Inc. -10-...
- Page 4 -------- -------- Reference: To test the humimeter FS2. Do not use for measuring the moisture! The principle is a comparison measurement with the drying out method according to DIN 10350: 1967 09. Take the measured sample and weigh it. Dry it out in an oven and weigh it again.
- Page 5 Not adjusted material • Measuring chamber Let your humimeter FS2 adjust to the surrounding temperature of the material for approximately half an hour. Moisture content A very high temperature difference has a negative effect on the stability of the measurement result.
- Page 6 : Switch upper Reset Materialcalib. : Switch lower Status : Exit : Enter numbers : Enter letters : Next or right : Left : Yes : No : Shift : OK © Electromatic Equipment Co., Inc. © Electromatic Equipment Co., Inc.
- Page 7 GRAIN MOISTURE METER Distributed by: ABQ Industrial LP USA Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451 OPERATING INSTRUCTIONS Web: https://www.abqindustrial.net E-mail: info@abqindustrial.net...
Need help?
Do you have a question about the FS2 and is the answer not in the manual?
Questions and answers