D-Link DCS-6116 User Manual page 31

Section 3 - Configuration
You may click Preview to fine-tune the image, or click Restore to recall the original
setting without incorporating the changes. When finished with the setting on this
page, click Save to enable the setting and click Close to exit the page. If you want
to configure another sensor setting for day/night/schedule mode, please click
Profile 2 and follow the steps below to setup:
1. Click Enable this profile.
2. Select the applied mode: Day mode, Night mode, or Schedule mode. Please
manually enter a range of time if you choose Schedule mode.
3. Configure Exposure settings in the second box.
4. Configure Image Settings in the third box.
5. Click Preview to check your settings or Restore to reset to defaults.
6. Click Save to enable the setting and click Close to exit the page.
D-Link DCS-6116 User Manual 31