D-Link DCS-6116 User Manual page 57

Section 3 - Configuration
Video clip: Select to send video clips when a trigger is activated.
Source: Select a source of video clip.
Pre-event recording: The camera has a buffer area. It temporarily holds data up to
a certain limit. Enter a number to decide the duration of recording before a trigger is
activated. Up to 9 seconds can be set.
Maximum duration: Specify the maximum recording duration in seconds. Up to 20
seconds can be set. For example, if pre-event recording is set to 5 seconds and the
maximum duration is set to 10 seconds, the camera continues to record for another
4 seconds after a trigger is activated.
Maximum file size: Specify the maximum file size allowed.
File name prefix: Enter the text that will be appended to the front of the file name.
System log: Select to send a system log when a trigger is activated.
When completed, click Save to enable the settings and click Close to exit this page.
The new media settings will appear on the Event Settings page.
D-Link DCS-6116 User Manual 57