Remington 498 Operating Instructions Manual page 25

IMPORTANT
• Recommended for use with Remington
• Model 498 users: DO NOT use power fasteners longer than 1
• If power fastener goes below the top surface of the board, use penetrating control
disc (see illustration below) or washered SPW-type power fasteners.
• Operators and bystanders must ALWAYS wear goggles and ear protection which
meet or exceed the accepted standards for adequate protection in your country. In
the USA, refer to ANSI standards. In Canada, refer to CSA standards.
*Use power fastener with penetration control disc,
part number 015549.
.27 CALIBER strip loads for
powder actuated tools
114915
Application Chart
power load strips and power fasteners.
®
Load
Stock Level
Number Number
78757 3
78758 4
78759 5
25
Color Code
Load Case
Strength Body
medium brass
heavy brass
extra heavy brass
/ ".
1
2
Head
Green
Yellow
Red