Experience real-time two-way feedback right on the remote’s LCD screen when used with compatible Z-Wave smart devices. Enjoy this same feedback when ● Rechargeable Lithium Polymer Battery used with URC’s ever expanding list of 3rd party products. ● Charging Cradle ● Button LED Backlighting: Use your remote with ease regardless of lighting conditions thanks to the MXHP-R700’s LED button backlighting.
MX HomePro devices. Further enhancements may be added, for all inquires please contact URC Technical Support. ● This remote communicates exclusively through 2.4 GHz Wi-Fi using b/g/n signals.
Using the MXHP-R700 (Remote): The Home menu pages display all the programmed activities and devices within the MX HomePro system. To navigate to this, simply press the Home button and use the Up and Down buttons to move throughout the menu. Press any button adjacent to the screen to select an activity or device.
Displaying the Settings: Entering the Settings Menu is accomplished by pressing and holding the Home and Enter (ENT) buttons simultaneously for three (3) seconds. Use the Up and Down buttons to navigate between items on the Settings Menu. To select, press the button on the side of the LCD screen or the Select (SEL) button when the item is highlighted.
Settings Menu: The following sections cover the sub-menus found within the Settings Menu: Network Settings: This menu displays the network information about the MXHP-R700 and the network it is connected to. From this screen, it is possible to scan for different Wi-Fi networks, select a network to connect to, and enter any custom settings.
Page 8
When using smart home devices that use Z-Wave, it is necessary to log the Accessory Account info onto the remote (see MX HomePro Installation Guide). The Accessory Account info item allows the entry of a URC TRF-ZW account username and password.
Page 9
Sleep Timer: This setting item allows the user to adjust the amount of time the LCD remains On when not in use. The time can be set independently based on whether the remote is using battery power or is connected to the charger. Selecting an item on this screen allows for the settings of each Sleep Timer value.
Page 10
System: This menu displays data about the remote’s operating system, memory, and other information. Press the More button to view further system information or press Go Back to exit to the previous menu. Button Light: Adjust the brightness of the LEDs that backlight the buttons of the MXHP-R700. Adjust the button light brightness by using the “-”...
Page 11
Power: Displays the remaining battery level of the remote. The low battery warning message can be adjusted from this section. Adjust the battery percentage using the “-” and “+” buttons to do so. Once adjusted, press Save. Pressing Go back reverts to the remote’s last saved setting.
Page 12
Pickup: This menu allows the user to adjust the sensitivity of the remote when reacting to being picked up. Increase or decrease the sensitivity using the “-” and “+” buttons. Once adjusted, press the Save button. Pressing the Go Back button returns to the remote’s last saved setting...
Page 13
Firmware Update: Selecting this makes the remote search for any available firmware update. When available, the screen displays as seen on the right. Select Yes to begin the updating the remote’s firmware. Select No to return to the previous menu. When the firmware updates successfully, this screen is displayed as confirmation.
Page 14
Select Yes starts the factory reset process. This should only be done when instructed by URC Technical Support or by the smart home professional installer. Selecting No returns the user to the previous screen.
To begin programming the system, log into the MX HomePro Editor via: Click on the section title above to read the full terms and conditions of the Limited Warranty Statement. Also available publicly on the URC home page. www.mxhomepro.com End User Agreement See the MX HomePro Programming Guide for more details.
Page 16
Warning! Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
Need help?
Do you have a question about the MX HomePro MXHP-R700 and is the answer not in the manual?
Questions and answers