Advertisement
Quick Links
Wireless Remote Terminal
Touchscreen Terminal for OmniLogic
Owner's Manual
620 Division Street, Elizabeth NJ 07207
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Contents
Description............................2
Before you Begin....................2
Installation.........................3
Operation...........................4
Care and Maintenance...........7
Troubleshooting....................8
HLWIRELESS
Hayward Pool Products
Phone (908)-355-7995
www.hayward.com
092578 RevB
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hayward HLWIRELESS
Summary of Contents for Hayward HLWIRELESS
-
Page 1: Table Of Contents
Touchscreen Terminal for OmniLogic Owner's Manual Contents Description......2 Before you Begin....2 Installation......3 Operation......4 Care and Maintenance...7 Troubleshooting....8 HLWIRELESS Hayward Pool Products 620 Division Street, Elizabeth NJ 07207 Phone (908)-355-7995 www.hayward.com USE ONLY HAYWARD GENUINE REPLACEMENT PARTS USE ONLY HAYWARD GENUINE REPLACEMENT PARTS... -
Page 2: Important Safety Instructions
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Hayward could void the user’s authority to operate this equipment. -
Page 3: Description
Description The OmniLogic HLWIRELESS Wireless Terminal is a rechargeable touchscreen remote control for Hayward OmniLogic pool automation controls. The terminal is wireless and portable. Its unique watertight housing and floating design allows it to be used outdoors, even while inside the pool or spa. -
Page 4: Installation
[WPA2-PSK-CCMP] 100 linksys [WPA2-PSK-CCMP] WIRELESS Welcome to the Hayward Wireless Remote connection configuration Press OK to setup your new remote. After pressing OK at the "Welcome" screen, the Wireless Terminal will display the network name, security type, and signal strength of all access points within range. Select your home network's name. -
Page 5: Operation
OmniLogic Operation Manual or the included Quickstart Guide. When searching Hayward's website for the latest firmware, note that the Wireless Terminal uses the same firmware file as the Wired Terminal. If a Wired Terminal is also used in the system, the firmware should always be upgraded at the same time as the Wireless Terminal. - Page 6 Function The HLWIRELESS Wireless Terminal provides the same functionality as the OmniLogic's Local Terminal except for the following: • No Service Mode - The OmniLogic Service mode is only accessible from the Local Terminal. • Limited Configuration options - Full access to all OmniLogic configuration settings is only available at the Local Terminal.
- Page 7 2 minutes 2 / 2 POOL vsp pump 100% ºF 1 / 2 system info date/time display language DISPLAY datalog network setting shell command omnilogic server º heating themes SYSTEM configuration favorites config USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
-
Page 8: Care And Maintenance
No ClearExec Input No EraseCfg EraseConfig EraseCalib ShowStack ShowDDT ShowConfig Would you like to readjust the calibration and then restart the Save DDT No SaveDDT ShellCmd system? No RemoveDDT RemoveDDT EraseCalib ShowStack ShowDDT ShowConfig ShellCmd USE ONLY HAYWARD GENUINE REPLACEMENT PARTS... -
Page 9: Troubleshooting
I dropped my Wireless Terminal and now it won't work. A sudden shock from a drop can actuate the internal Storage Mode switch. If this happens, placing the Wireless Terminal in the charging cradle should allow the unit to resume operation. USE ONLY HAYWARD GENUINE REPLACEMENT PARTS... - Page 10 1 / 2 static dynamic system info date/time protocol properties Local IP 172.16.170.70 display language Netmask 255.255.255.0 network datalog Gateway 172.16.170.1 DNS1 192.168.100.47 omnilogic shell command DNS2 192.168.100.251 CONFIGURATION SYSTEM selection configuration USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
- Page 11 Be sure to line up the charging pins with the reset magnet and swipe from left to right across the magnet. If the unit won't go into Storage Mode, contact Hayward Technical Support. My battery doesn't hold a charge or no longer charges.
- Page 12 (3) years. Hayward also warrants its Aqua Trol chlorination products to be free of defects in materials and workmanship, under normal use and service for a period of one (1) year. These warranties are applicable from the initial date of purchase on private residential swimming pools in the US and Canada.
Need help?
Do you have a question about the HLWIRELESS and is the answer not in the manual?
Questions and answers