Troubleshooting - Hayward HLWIRELESS Owner's Manual

Storage Mode
Storage Mode allows the user to completely turn off the Wireless Terminal, preventing the battery from
discharging. This feature is useful for storing the Wireless Terminal or just temporarily removing power
to save the battery from draining. To enter Storage Mode, locate the charging pins on the handheld
unit and the reset magnet on the underside of the charging cradle.
Swipe the charging pins across the reset magnet as shown below. Note that you MUST swipe from
left to right. When shut down, there is no battery drain and the unit can be stored or shipped. To exit
Storage Mode, place the Wireless Terminal into the charging cradle. Note that the Wireless Terminal
can sometimes go into Storage Mode if it is subjected to a sudden shock or drop. Placing it back in
the charging cradle will restart the unit.
Swipe charging pins
across Reset Magnet
from LEFT to RIGHT
My Wireless Terminal will not turn on.
Place the Wireless Terminal in the charging cradle and charge for at least 30 minutes. If that
doesn't work, make sure that it's properly seated and that the charging pins on the Wireless
Terminal are touching the two pins in the charging cradle. Also confirm that there is input power to
the charging cradle from the wall.
I dropped my Wireless Terminal and now it won't work.
A sudden shock from a drop can actuate the internal Storage Mode switch. If this happens, placing
the Wireless Terminal in the charging cradle should allow the unit to resume operation.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Charging Pins

Troubleshooting

Reset Magnet
8