Configuring The Settings; Using The Settings Menus; Input Settings - Primare SC15 User Manual

C O NF I G U R I NG T HE SETTINGS

Using the settings menus

You can view and change the SC15 settings from the front
panel, remote control, or using the Prisma app.
to display the settings menu
Simultaneously press the A or V buttons on the front
l
panel, or press the MenU button on the remote control.
The settings menu is displayed:
SC15 SETTINGS
INPUT
AUDIO
GENERAL
to step between settings
Press the A or V buttons on the front panel or remote
l
control.
The current setting is shown highlighted.
to change a setting
Press the SeleCtoR button on the front panel or the
l
SeleCt button on the remote control.
The current value is shown highlighted.
Press the A or V buttons on the front panel, or the
l
A or V or < or > buttons on the remote control, to
change the value of the setting.
As you change it the new value is shown in the menu.
Press the SeleCtoR button on the front panel or the
l
SeleCt button on the remote control to save the value
you have set.
to navigate back or cancel editing a setting
Press and hold the SeleCtoR button on the front panel,
l
or press the button on the remote control.
to exit from the settings menu
Simultaneously press the A or V buttons on the front
l
panel, or press the MenU button on the remote control.
1

InPUt SettInGS

The InPUt SettInGS menu allows you to customise the
inputs to suit the sources in your system:
A1 SETTINGS
INPUT
ALIAS
STATUS
InPUt
Initially the InPUt SettInGS shows the settings for the
0
currently selected input. Alternatively the InPUt option
allows you to step between all the inputs. The subsequent
options will change according to the input.
AlIAS
Allows you to give the source a name; eg RADIo.
Highlight the AlIAS item, then press the SeleCt button
l
on the remote control.
The RenAMe InPUt menu is displayed:
RENAME INPUT
Press the A or V buttons on the front panel, or the <
l
or > buttons on the remote control, to select the first
letter.
Press the SeleCtoR button on the front panel or the
l
SeleCt button on the remote control, to select it.
After adding each character you have the options:
ADD neW CHARACteR
where ConFIRM shows the alias you have entered so far.
Select ADD neW CHARACteR to add the remaining
l
letters, up to a maximum of six characters.
Select ConFIRM when you have entered the alias you
l
want.
0
A1
A1
ENABLED
0
A
ConFIRM 'A'
CleAR AlIAS
StAtUS
Choose between enABleD (default) or DISABleD to
specify whether the input is enabled.
AUto SenSe
Choose between: SeleCt to automatically select an
input containing an audio signal if the SC15 is on;
WAKe+SeleCt to automatically wake up the SC15 from
standby, if necessary, and select an input containing
an audio signal; and oFF (default) to disable automatic
switching.
VolUMe
Choose between VARIABle (default) or FIXeD to specify
whether the input should have variable or fixed gain.
FIXeD is 0dB gain, equivalent to volume setting 66, and
will overrule MAXIMUM VolUMe in AUDIo SettInGS.
Selecting FIXeD will show a loud-volume warning. Select
yeS to proceed or no to cancel the fixed gain setting.
Fixed gain functions as an SSP (Surround Sound Pass-
through) allowing the SC15 to be used as an amplifier in
a multi-channel system setup
InPUt GAIn
Choose between: -0dB to -1dB, 0dB (default), or +1dB to
+0dB to set the gain for the selected input.
If the gain is set too high on an input clipping may occur.
SC15 Prisma System Control Center User Guide