Connecting Direct Sources - Primare SC15 User Manual

C O N N E C T I NG DIRECT SOURCES
Digital optical source
Digital coax source
Analogue source
These methods of playing music from the SC15 involve
connecting the source to the SC15 via a cable, and don't
require Wi-Fi, Ethernet, or Bluetooth.
to play music from a source
Connect the source via a suitable cable:
l
Analogue Phono RCA cable
Digital optical source Digital optical cable
Digital source Digital coax cable
Select the source from the front panel, or using the
l
remote control.
If you have a phone or tablet on the same Wi-Fi network
as the SC15 you can also use the Prisma app to select
and control sources.
SC15 Prisma System Control Center User Guide
Digital optical cable
SC15
ANALOG
OUT IN
LAN
DIGITAL IN DIGITAL OUT
L
R
A1 D2 D3 D4 D5 D6 USB
Coax cable
RCA cable
to use the SC15 as a PC/Mac sound output device
Connect the Mac or PC to the SC15 via a USB-A to
l
USB-B cable.
PC
Windows 7, 8, 8.1, or 10 (/6-bit) is required. You
need to install the Primare xmos audio driver, available on
primare.net.
Macintosh
OSX 10. or later is recommended. No driver is required.
Connect the computer's USB port to the USB B input on
l
the SC15 using a USB A to USB B cable.
The SC15 will then appear as a sound output device
called SC15 in the Sound control panel (PC) or Sound
system preferences panel (Macintosh).
Select the PC/MAC source on the SC15.
l
Select the SC15 as the sound output device in the
l
Mac Sound system preferences panel or the PC Sound
control panel.
TRIG IR-OUT IR-IN RS232
OUT
CON
PC/MAC SPS
PC/Mac
USB-A to USB-B cable
WiSA Loudspeakers
11