Additional Information; Phase; Burn-In; Rs232 And Trigger - Primare SC15 User Manual

A D D I TI ON A L I NFORMAT ION
These instructions help you get the best possible sound
from your SC15.

Phase

The phase of the AC supply can make a significant
difference to the sound.
Use the Polarity Pen supplied with the SC15 to verify
which pin is live on your AC power cable.
Ensure that the live pin of the AC power cable is
connected to the left-hand pin of the power connector,
viewed from the back panel:
Live

Burn-in

Your Primare will start to sound best after an initial burn-in
of approximately  hours.
You will notice a further smaller improvement in sound
quality for at least another  days' playing.

RS232 and trigger

The RS input allows you to connect the SC15 to a
controller system. Use a twisted (null modem) cable. For
more information contact Primare at info@primare.net or
visit www.primare.net.
The Trigger output allows the SC15 to switch on other
devices, such as a DD15.
18

Using the SC15 with a DD15

Your SC15 is an ideal companion to the Primare DD15
CD Transport. For best results link the two products
together as follows using the two cables supplied with the
SC15:
to connect the trigger cable
The Trigger cable ensures that the DD15 switches on, or
to standby, when you operate the
O button on the front
SC15.
panel of the
Connect the Trigger cable from the SC15 TRIG OUT to
l
the DD15 TRIG IN.

Factory reset

Press and hold the O standby button on the front panel to
display the main firmware version number.
Press and hold the O standby button on the front panel for
10 seconds to perform a factory reset of the SC15.
You can also do a factory reset from the Prisma app,
or from the GeneRAl SettInGS menu; see GENERAL
SETTINGS , page 15.

network troubleshooting

Front panel display
The front panel display indicates the type of network
connection:
lAn indicates that you are connected by an Ethernet
cable.
WiFi indicates that you are connected by wireless.
network status
The Con indicator on the back panel indicates the
network status:
on Indicates the SC15 is connected to a network
oFF Indicates no connection to a network
Flashing indicates that the network needs to be configured
using the Google Home app.
Spotify Connect
The Spotify Software is subject to third party licenses
found here:
https://beta.developer.spotify.com/private-
documentation/esdk-third_party_licenses
SC15 Prisma System Control Center User Guide