Using The Sc15; Front Panel Controls; Changing The Volume; Selecting A Source - Primare SC15 User Manual

U S I NG T H E S C15

Front panel controls

Standby O
Switches the SC15 to standby, or switches it on from
standby.
SeleCtoR
Steps between inputs.
A and V
Change the volume.
Settings menus
Pressing A and V simultaneously displays the settings
menus or exits from the menus.
In the settings menus:
Pressing A or V steps between the settings.
Pressing SeleCtoR selects a setting or saves an edited
setting.
Holding down SeleCtoR navigates back or cancels
editing a setting.

Changing the volume

The SC15 allows you to vary the volume from 0 (silence)
to 99 (maximum).
to change the volume
Press the A or V buttons on the front panel, or press
l
the + or – buttons or the A or V buttons on the remote
control.
The current volume setting is shown on the front panel; for
example:
VOL 8
10

Selecting a source

The SC15 provides a choice of seven inputs. Initially these
are labelled as shown in the following table, but you can
give them your own aliases to suit the sources in your
system; see ALIAS , page 1.
label Description
A1 Analogue on RCA connectors.
D–D Digital optical on TOS connectors.
D5 Digital coax on RCA connectors.
D6 Digital optical or analogue on a
.5mm jack.
PC/MAC Digital on a USB-B connector.
to select a source
Press the SeleCtoR button on the front panel until
l
the source is indicated on the front panel display; for
example:
A1
Alternatively, press the < or > buttons on the remote
l
control to step between sources, or press one of the
buttons 1 to 7 on the remote control to select the
corresponding source directly.

Changing the display brightness

to change the front panel display brightness
Press the DIM button on the remote control to step
l
through the three levels of illumination and blank.
If you turn the display off it will be restored briefly when
you operate any control.
The display automatically dims after ten minutes; you can
adjust this delay in the settings menus; see GENERAL
SETTINGS , page 15.
SC15 Prisma System Control Center User Guide