Enttec Datagate Mk2 Quick Start Manual page 6

Switcher 2-1:
Controllable Switch operator, acts as a
normal Input A to Output Action, but when the trigger
value is greater than the set Switch it does Input B to
Output Action
Must have all input sources and output sources
connected.
Compressor proportinally reduces all channels of the
input accroding to the value on the control channel.
For example: if control value input is 127 all the values on
the input will be reduced to 50% at output.
This OSC module will allow control from an OSC
controller on port 8000.
In each OSC message, there is another argument to
convey level which is a float between 0 and 255.
Limitation: Only one OSC module allowed in the profile
OSC Instructions:
OSC Generator module:
•
Send DMX from Datagate using OSC commands
•
IP address is not used
•
Send OSC on port 8000 to Datagate's IP address
TouchOSC Examples:
/dgmk2/4 220 : sends value 220 on 5th DMX channel
/dgmk2/127 125 : sends value 125 on 128th DMX channel
How to send OSC packets using UDP:
OSC packet needs to be in multiple of 4 bytes and
spaced accordingly.
OSC packet must be sent in 3 segments (tag, format,
value)
tag=/dgmk2/<ch>
format= ,f
value= <float>
6
Each segment must be a multiple of 4 bytes. Pad with 00 at
the end, if required
Some examples:
To change DMX channel 5 to value 200:
ASCII: (tag, f value)
/dgmk2/4\00\00\00\00,f\00\00CH\00\00
HEX:
2f 64 67 6d 6b 32 2f 34 00 00 00 00 2c 66 00 00 43 48 00 00
To change DMX channel 121 to value 50:
ASCII:
/dgmk2/120\00\00,f\00\00BH\00\00
HEX:
2f 64 67 6d 6b 32 2f 31 32 30 00 00 2c 66 00 00 42 48 00 00
Web: RDM Tools (License required)
RDM Tools page, allows access to RDM functions on the
Datagate Mk2. All DMX ports set as output, can be used to
discover RDM devices, and change the common RDM options
such as: DMX address, Personality and Identify.
Each RDM device, has its's own set of functions and buttons,
so multiple devices can be handled easily. Clicking on the
device ID, opens a new page to handle this device
separately.
Quick Start Manual
Datagate MK2 70044
For latest version visit:
www.enttec.com
ID: 2691