Download Print this page
Arecont Vision MegaBall AV3146DN-3310-D-LG Installation Manual

Arecont Vision MegaBall AV3146DN-3310-D-LG Installation Manual

Advertisement

Quick Links

Arecont Vision MegaBall™ Installation Manual
0 | P a g e

Advertisement

loading
Need help?

Need help?

Do you have a question about the MegaBall AV3146DN-3310-D-LG and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Arecont Vision MegaBall AV3146DN-3310-D-LG

  • Page 1 Arecont Vision MegaBall™ Installation Manual 0 | P a g e...
  • Page 2 Arecont Vision MegaBall™ Installation Manual MegaBall™ Wall Mount Version (-W) Installation Manual Inside the box: Plug the Ethernet cable into the MegaBall™ PoE female RJ45 connector. (Image 2) Arecont Vision MegaBall™ camera with NOTE: If the camera will be powered via PoE, wall mount (indoor use only) please skip to step 5.
  • Page 3 Arecont Vision MegaBall™ Installation Manual Adjusting the Tilt, Pan, Z-Axis (yaw): installation practices are not covered under warranty! To adjust the camera tilt, pan or z-axis (yaw), Adjusting the Focus, Iris and Field of View: loosen the ring on the wall mount bracket as...
  • Page 4 Arecont Vision MegaBall™ Installation Manual MegaBall™ Dome Version (-D) (-DA) Installation Manual Inside the box: Mounting the Camera: Arecont Vision MegaBall™ camera with in- Remove the camera and hardware from the ceiling mount (indoor use only) box. Surface mount (preassembled on dome) Using the mounting template, prepare the C.
  • Page 5 Arecont Vision MegaBall™ Installation Manual Using the provided Security L-key (Image In-ceiling Mount Installation (Optional) 1F), loosen the three (3) screws securing the Using the mounting template, cut a hole in the dome cover (Image 3). Remove the vandal surface for mounting.
  • Page 6 Arecont Vision MegaBall™ Installation Manual Adjusting the Tilt, Pan, Z-Axis (Yaw): Adjusting the Focus, Iris and Field of View: To adjust the camera tilt, pan or z-axis (yaw), For the vari-focal model, adjust focus, iris and loosen the 3 set screws on the in-ceiling field of view using the provided Security L-Key mount as shown in Image 6.
  • Page 7 Arecont Vision MegaBall™ Installation Manual Attach the provided dome cover (Image 1D on Page 3) to the bezel as shown in Image Drift Pin Image 10: Close lens iris as necessary For the fixed-focal model, adjust the focus by loosening the two set screws on the front shell...
  • Page 8 Arecont Vision MegaBall™ Installation Manual Audio Bezel Installation ( -DA models only): Secure the dome cover to the camera using the provided Security L-Key (Image 1H) as If adding dome cover (Image 1E) on the bezel shown in Image 17.
  • Page 9 The the AV100 application manager as shown in input is additionally protected with a serial 250 Ohm Image 21 and wait for “Arecont Vision resistor and a debouncing circuit. Duration of Camera Installer” window to appear as shown any input signal should be at least 5ms to comply in Image 22.
  • Page 10 (found on CD) for details on camera For basic mode, select “Install Cameras” on configurations. the Arecont Vision Camera Installer as shown in Image 22. Confirm that all the cameras connected to the network switch appear in the upper window.
  • Page 11 Arecont Vision MegaBall™ Installation Manual MegaBall Accessories (Sold Separately) Wall Mount (D4S-WMT-B or D4S-WMT) Installation Instructions Inside the box: Wall mount ( Fits ¾” NPT Standard) Pack of three (3) machine screws, four (4) wood screws and four (4) dry wall anchors C.
  • Page 12 Arecont Vision MegaBall™ Installation Manual MegaBall Accessories (Sold Separately) Pendant Mount (D4S-CMT-B or D4S-CMT) Installation Instructions Inside the box: Attach surface mount (Image 1B on Page 3) to pendant mount as shown in Image 28 Pendant Mount (Fits with ¾” NPT) using three machine screws provided.
  • Page 13 Arecont Vision MegaBall™ Installation Manual MegaBall Accessories (Sold Separately) Junction Box Adapter (SV-JBA) Installation Instruction Inside the box: Junction Box Adapter Pack of four (4) machine screws C. One double-sided hex key D. Pack of four (4) wood screws and four (4)
  • Page 14 Arecont Vision MegaBall™ Installation Manual MegaBall Accessories (Sold Separately) Electrical Box Adapter (SV-EBA) Installation Instructions Inside the box: (Accessory Sold Separately) Electrical Box Adapter Pack of four (4) machine screws Image 34-1 Single gang box D4S-WMT Bracket holes Image 34-2 Double gang box...
  • Page 15 Arecont Vision MegaBall™ Installation Manual P a g e...