Replacing The M.2 Solid-State Drive - Lenovo ThinkSmart Hub 500 User Manual And Hardware Maintenance Manual

Figure 61. Installing the memory module
Figure 62. Closing the retainer
6. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 56.

Replacing the M.2 solid-state drive

Attention: Do not open your meeting console or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the system cover. For details, see "Removing the system cover" on page 20.
2. Remove the system fan. For details, see "Replacing the system fan" on page 30.
3. Remove the heat sink. For details, see "Replacing the heat sink" on page 31.
4. Remove the system board. For details, see "Replacing the system board" on page 39.
5. Replace the M.2 solid-state drive.
.
Chapter 4 Replacing hardware
43