Figure 27. Installing the Skype board bracket
Figure 28. Installing the Skype board with the bracket and holder
4. Route all the cables that you disconnected from the failing Skype board, and then reconnect the cables
to the new Skype board.
5. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
Replacing the Wi-Fi card
Attention: Do not open your meeting console or attempt any repairs before reading the Important Product
1. Remove the system cover. For details, see "Removing the system cover" on page 20.
2. Replace the Wi-Fi card.
• Type 1
Hub 500 User Guide and Hardware Maintenance Manual