Advertisement
iXE-W400E Software Update Instruction Manual
The following process provides information on how to successfully perform a software
update for the iXE-W400E. The new software is 0.1.7.
IMPORTANT: Please follow each step in the correct order to ensure that the iXE-W400E gets
updated correctly.
Before commencing the update procedure you should prepare all the necessary equipment. To
perform the update you will need the following items:
• Access to a computer
• Blank USB flash drive with a minimum of 4GB capacity
Step One: Downloading File From Alpine Website
1.1 Download the update file from the Alpine Australia website.
1.2 Extract all zip files onto your computer.
1.3 You will need a blank USB stick to complete this Software Update. The USB stick can
not contain any other files and should be formatted in FAT32 format, as per image below.
1.4 Open the update file (0.1.7) from downloads on your computer.
Advertisement
Table of Contents
Related Manuals for Alpine iXE-W400E
Summary of Contents for Alpine iXE-W400E
- Page 1 The following process provides information on how to successfully perform a software update for the iXE-W400E. The new software is 0.1.7. IMPORTANT: Please follow each step in the correct order to ensure that the iXE-W400E gets updated correctly. Before commencing the update procedure you should prepare all the necessary equipment. To perform the update you will need the following items: •...
- Page 2 Software Update Instruction Manual 1.5 Copy all of the content files and then paste them to the root directory of your USB flash drive 1.6 Once the files have finished copying to the USB, safely remove the USB from the com- puter.
- Page 3 Software Update Instruction Manual 2.5 The update takes approximately 2-3 minutes. 2.6 Once the update has completed a pop-up message will appear. ‘MCU update is completed please remove USB’. 2.7 Remove the USB from the unit. 2.8 Another pop-up message will appear ‘The update is completed, please click ok button to restart the system’.
- Page 4 Software Update Instruction Manual 3.3 Scroll down and tap ‘Version Info’ button. 3.4 The following screen should display ‘Software Version 0.1.7’ on the second line. 3.5 If the software update was unsuccessful we recommend retrying the update from the beginning.
Need help?
Do you have a question about the iXE-W400E and is the answer not in the manual?
Questions and answers
cần timg bản cập nhật phần mềm lxe-w400e
To find software updates for the Alpine iXE-W400E, access the Alpine Electronics of Australia website. Follow these steps:
1. Go to the Alpine website.
2. Navigate to the software updates section.
3. Locate the iXE-W400E update page.
4. Download the latest software update file.
Ensure you follow the update instructions carefully to complete the process correctly.
This answer is automatically generated