Advertisement
Placing your WL590E to improve
D
Wireless Connectivity
After confirming that the WL590E is connected to a
After connecting your WL590E to a wireless network,
wireless network, you may now disconnect the Ethernet
the connection type status displayed in the Web User
cable from the computer and the WL590E Repeater.
Interface will refresh and display the corresponding
You may now reposition the WL590E Repeater between
frequency band (2.4GHz or 5.0GHz) of your wireless
the wireless router and the area where there is no
network. It would also be indicating if there are any
wireless signal.
wireless device(s) connected to your WL590E as seen
on the succeeding images.
Knowing more about your WL590E's
E
For 2.4GHz
SMART LED Indicator
For 5.0GHz
Do take note that it is ideal for the WL590E Repeater
to be placed in a location where it can receive good
wireless signal from the wireless router. This is to
ensure that a signal of good quality would be extended
to your wireless devices.
Through
the
SMART
LED
indicator, you may easily identify
the areas in your house where
the wireless reception from
your main router is weak or has
no wireless signal.
Connecting Your Wireless Devices
Throughput vs Wireless Coverage
F
to your WL590E Repeater
Wireless reception and throughput may vary according
Connect your wireless devices to the WL590E Repeater's
to the number of wireless devices that are in use. Other
wireless network.
nearby wireless devices, structure types, building
materials may also affect the overall throughput of
the device.
NOTE: The higher the throughput, the lower the
extended wireless coverage would be.
NOTE: Your WL590E Repeater broadcasts two SSIDs
(2.4GHz and 5.0GHz). Internet surfing experience
is likely to improve on 5.0GHz with probably lesser
wireless interference, however, the 5.0GHz SSID can
only be detected if your end device supports the 5.0GHz
wireless interface as well.
G
Device Reset
To restore the device to its default factory settings,
press the Reset button of your WL590E Repeater
for 10 seconds then release. All LEDs would turn off
indicating that the device has been reset.
* The WL590E Easy Start Guide is designed to get you
up and running with your WL590E device. This Easy
Start Guide along with the User Manual which provides
a more advanced guide to this product, is included in
the Resource CD and is also downloadable from the
Aztech Support Website ( www.aztech.com/support ).
Advertisement
