Table of Contents
Advertisement
If you use cables longer then 100m you should put in a terminator at the last item in your daisy chain!
If you use cables longer then 100m you should put in a terminator at the last item in your daisy
If you use cables longer then 100m you should put in a terminator at the last item in your daisy
Use DMX cables with a 120Ohms shield only! All Plugs should use XLR connectors!
Use DMX cables with a 120Ohms shield only! All Plugs should use XLR connectors!
Use DMX cables with a 120Ohms shield only! All Plugs should use XLR connectors!
The connectors configuration is as follows:
The connectors configuration is as follows:
If you want to produce a DMX terminator on your own, you have to insert a Terminator at the plug.
If you want to produce a DMX terminator on your own, you have to insert a Terminator at the plug.
If you want to produce a DMX terminator on your own, you have to insert a Terminator at the plug.
This should have a size of 120Ohms and 1/4W. It has to be inserted between Pin 2 (Data
e of 120Ohms and 1/4W. It has to be inserted between Pin 2 (Data -) and Pin 3
e of 120Ohms and 1/4W. It has to be inserted between Pin 2 (Data
(Data +).
M I N I S T U D I O P A R 7 X 4 W
M I N I S T U D I O P A R 7 X 4 W
6 / 12
Advertisement
Table of Contents
