Table of Contents
Advertisement
Addr
DMX address setting
address setting
5. Push the UP/DOWN buttons until the display shows
Push the UP/DOWN buttons until the display shows Addr.
6. Push ENTER
7. 1 appears in the display blinking.
1 appears in the display blinking. With the UP/DOWN buttons you can no adjust the DMX
address from 1 to 512
8. Push ENTER to confirm
5. Master Slave configuration
If you want to daisy chain and control more than one item you can use the Master Slave Mode. To do
If you want to daisy chain and control more than one item you can use the Master Slave Mode. To do
If you want to daisy chain and control more than one item you can use the Master Slave Mode. To do
so you have to daisy chain your items as you would do when you want to set up a dmx chain. You can
so you have to daisy chain your items as you would do when you want to set up a dmx chain. You can
so you have to daisy chain your items as you would do when you want to set up a dmx chain. You can
use max 16 items for this mode. The first item in line is the master and the other items will react
use max 16 items for this mode. The first item
according to him. The master item can be set up to the desired program or mode and the others will
according to him. The master item can be set up to the desired program or mode and the others will
according to him. The master item can be set up to the desired program or mode and the others will
follow. The slave items should be set up as follows.
follow. The slave items should be set up as follows.
1. Push the Menu button as often until you see SLNd in
Push the Menu button as often until you see SLNd in the display. Push Enter to confirm.
2. No choose the desired Slave mode and confirm again with ENTER.
No choose the desired Slave mode and confirm again with ENTER.
3. The slave item will now react according to the master.
The slave item will now react according to the master.
6. Sound to Light
-
Set up the sound to light mode to ON as described above.
Set up the sound to light mode to ON as described above.
-
Now the item will react a
-
This option can be used with the master slave mode as well.
This option can be used with the master slave mode as well.
7. Technical Data
Voltage:
Power consumption:
Lightsource:
Beam Angle:
Weight:
Measures:
Ambient temp.
Modes:
With the UP/DOWN buttons you can no adjust the DMX
figuration
in line is the master and the other items will react
ccording to the sensitivity of the mic.
120V ~ 230V 50/60Hz
120V ~ 230V 50/60Hz
30W max.
W max.
7 x 4W 4in1 LED
7 x 4W 4in1 LED
25°
1,6kg
d137 x L252,8mm
L252,8mm
0°C - +40°C
+40°C
DMX (1,2,5,6 oder 8Ch)
DMX (1,2,5,6 oder 8Ch)
Automatic Mode
Automatic Mode
Sound To Light Mode
Sound To Light Mode
Master Slave Mode
Master Slave Mode
M I N I S T U D I O P A R 7 X 4 W
M I N I S T U D I O P A R 7 X 4 W
the display. Push Enter to confirm.
11 / 12
Advertisement
Table of Contents
