Peripherals Cleaning - Mindray Resona 7 Service Manual

4. Remove the cover and clean the cover.
7. Holder cleaning
Tool: dry soft cloth, soft brush, mild soap-suds
Method:
a) Use soft dry cloth to clean off the dust on probe and gel holder and its gap; use the soft
brush to clean off the dust from gaps and probe holders of smaller intracavity probes.
b) If there are still stains, remove the probe holder. Use mild soap-suds to clean off the
stains. Re-install it after being air dried.
c) Gel heater: unplug the cable of gel heater, and take off the heater. Use the mild
soap-suds to clean the heater. Use soft brush to clean the holes. Use soap-suds to
clean off the stains, and re-install it after air-dry.
8. Device cover cleaning
Tool: dry soft cloth, mild soap-suds
Method:
Use soft cloth to clean off the dust on the device cover (the part exposed).Or use mild
soap-suds to clean off the stains, and air dry it.
NOTE: it is preferred to use soft brush to clean off the dust on the port or socket rather than wet
cloth (such as probe socket, IO board and ports and sockets on power supply board).

12.2.2 Peripherals Cleaning

Perform the cleaning according to the reality. The test items without the configurations can be
ignored.
Item Procedures
Color/Black/White
1.
printer
2. Graph/text printer
3. Footswitch
4. Barcode reader
Table 12-4 List for peripherals cleaning
Use soft dry cloth to clean off the dust and stains on the
cover. Remove the cover to clean the internal of the printer. It
video
is necessary to abide by the operation procedures in
Operator's Manual to clean the printer.
Use soft dry cloth to clean off the dust and stains on the
cover. Remove the cover to clean the internal of the printer. It
is necessary to abide by the operation procedures in
Operator's Manual to clean the printer.
Use the dry soft cloth and soap-suds to clean off the dust and
stains on footswitch and the cables.
Use dry soft cloth to clean the glass board of the scanner,
and the clean off the dust on the cables and the bracket.
Please abide by the operation manual on the scanner to
perform the cleaning.
Process Description
Care and Maintenance 12-7