Table of Contents
Advertisement
• Stream Type
• Video Type
• Resolution
• Bitrate Type
• Bitrate
• Frame Rate
• Encoding Type
• I Frame Interval
Motion Tab
This tab lets you define areas that WILL be triggered if motion is detected. When you open this
tab, a red grid covers the screen (Default = Full Screen) . Parameters include:
• Channel
• Detect Mode
• Enable Motion Detection
• Planning
• Linkage Operation
• Full screen
• Clear all
To select specific areas to be triggered, click Clear all to clear the grid from the screen . Then, click
and drag over areas you want to be affected by motion detection . These new grids will be sensitive
to motion and will record when triggered .
To hide areas from view, use the Privacy Mask tab (see page 37) .
36
ProSeries NVR Installation Guide Only 03162018.indd 36-37
You MUST select Save and Exit to save any changes made.
Privacy Mask Tab
When you select Channel Setting/Channel Parameter/Privacy Mask tab, you can use the same
click and drag process to block out areas you do not want to be viewed . For example, you can
block out a security keypad from being viewed . When you have the screen set up how you want
it, click Save; the area selected becomes a black box . Click Exit on the confirmation screen.
Parameters are:
• Channel
• Enable Privacy Mask
• All clear
37
3/26/2018 10:32:53 AM
Advertisement
Table of Contents
