Power Sharing - Summit SINC2B120 Use And Care Manual

Heating
Place cookware on the cooktop. Please select from the Power Setting to
begin cooking.
Power Setting Mode: This function cooks at power ( wattage)
settings. When the unit is in the Readiness mode, if you would
like to turn on desired element, press "+" key once, the specific
digital display will show "0" and be blinking. Press "+" key
secondly within 60s to enter into level 4 directly, then you can press "+" or
"-"key to select desired power level. The unit will automatically return to
standby mode if the second "+" key is not chosen within 60 seconds. If the
user wants to set the timer for the unit to shut off automatically, please
refer to the Set Timer method. Heating power level settings:
Level
Power
Rear 1800W
Front 1300 W
Note: This function is equipped with safeguards against parching. The unit
might shut off automatically when this function is used for frying, stir-
frying, grilling and other high temperature cooking formats.

Power sharing

When both burners are on, one of the two burners would not have a power
level higher than level 6. Both of them together would not be more than
Max 8.
If only one burner is on, the heating zone can maintain its full heat setting.
But when operating both burners, their combined total is Max 8, meaning
that when operating the two burners at the same time, they'll self adjust
levels accordingly. When you increase the power of one side, the power
output of the other side will reduce automatically if their combined total is
more than Max 8(i.e., one side is at 5, the other burner automatically
reduces power to level 3, creating a total max 8 setting).
SUMMIT APPLIANCE
0 1 2
300
0 500
(500W ON6S OFF4S)
300
0
500
(500W ON6S OFF4S)
3 4 5
700 900 1100
700 900 1100
11
6 7 8
1300 1500 1800
1300
Felix Storch, Inc.