Cleaning Your Cooktop - Summit SINC2B120 Use And Care Manual

After each use, unplug or turn off the power and let your unit cool down
completely. When it is cool to the touch, apply approximately 1 teaspoon (5
ml) of nonabrasive cleaner to the surface of the ceramic glass with a lightly
dampened cloth. Use a second cloth to remove any remaining cleaner
residue. Wipe dry with a dry cloth.
Do NOT use the following to clean your unit:
Glass cleaners which contain ammonia or chlorine b le ach as these
materials may stain the cooktop
Caustic cleaners that may etch the surface
Abrasive cleaners
Metal scouring pads and scrub sponges
Powdery cleaners containing chorine bleach
Flammable cleaners such as lighter fluid or WD-40
Note: Sugary products can damage the ceramic glass surface. If dry
sugar, sugar syrup, tomato products, or milk spills on the surface
DURING heating, clean immediately.
Metal Marks and Scratches
1.Be careful not to slide pots and pans across your cooktop.
It will leave metal markings on the cooktop surface.
These marks are removable using a ceramic cooktop cleaner with
cleaning pad for ceramic cooktops.
2.If pots with a thin overlay of aluminum or copper are allowed
to boil dry, the overlay may leave black discoloration on the cooktop.
This should be removed immediately before heating again or the
discoloration may be permanent.
Note
: If the ceramic glass top of the cooktop is broken, turn off the unit;
the cooktop glass will have to be replaced. In this case, contact Summit
Appliance for assistance.
SUMMIT APPLIANCE

Cleaning Your Cooktop

14
Felix Storch, Inc.