Summit SINC2B120 Use And Care Manual page 7

Ensure that the underside of the induction cooktop is well ventilated
and the air inlet is not blocked.
The distance between the cooktop and any cupboard above the
appliance should be at least 30 inches.
2. After cutting the opening, remove any shavings or other loose material
that may interfere with the appliance's operation.
3. IMPORTANT NOTE: Do not seal the cooktop to the countertop. It must
be removed if service is necessary.
4. IMPORTANT NOTE: For unframed installation
outer edge of the glass
Before installing the cooktop
1. Ensure that cooktop is turned OFF.
2. Visually inspect the cooktop for damage.
Also make sure all cooktop screws are on tight.
3. Place the cooktop into the countertop cutout.
Model and Serial Number Location
The serial plate is located under the cooktop.
When ordering parts for or making inquiries
about your cooktop, always be sure to include
the model and serial numbers and a lot number
or letter from the serial plate on your cooktop.
SUMMIT APPLIANCE
not the support frame
,
6
adhere foam strip to the
,
.
Name Plate
Label Location
Felix Storch, Inc.