Whalen GC-1 Assembly Instructions

Andover cushion guest chair

Download this manual

MODEL No.: GC-1

LOT No.:

DATE OF PURCHASE:

1. Remove all the parts from carton, separate them into part numbers indicated on the list

and make sure part quantities are correct

2. Attach Seat Cushion (2) to Left & Right Legs (3L & 3R) by inserting the Female Connector

into Male Connector as shown in detail A. Make sure all the connectors are fully engaged.

NOTE: KEEP LEFT AND RIGHT LEGS (3L & 3R) EVENLY BALANCED WHEN ATTACHING

3. Attach Back Rest (1) by inserting the Female Connector into the Male Connector on Legs

as shown in detail #A.

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

ASSEMBLY INSTRUCTIONS

CONNECTORS.

Whalen Furniture Mfg. Inc

Factory No. 61-12199

Page # 1

Parts Provided

1 –Back Rest

2 –Seat Cushion

3 –Left Leg (3L) and Right Leg (3R)

Qty

(1)

(2)

Page 1 ASSEMBLY INSTRUCTIONS Parts Provided MODEL No.: GC-1 1 –Back Rest LOT No.: 2 –Seat Cushion DATE OF PURCHASE: 3 –Left Leg (3L) and Right Leg (3R) 1. Remove all the parts from carton, separate them into part numbers indicated on the list and make sure part quantities are correct 2.
Page 2: Operating Instructions
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to 5 year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.