Danfoss FC 302 Installation Instructions page 2

Installation Instructions
FC 302 with MCO - mains connectors and 4 cable glands
(134N8410)
Illustration 3.3 Mains Connectors and 4 Cable Glands
FC 302 with connectors - side view
Illustration 3.4 Side View
NOTICE
®
See the VLT AutomationDrive FC 301/FC 302 Design Guide
for dimensions and further information.
2
VLT® AutomationDrive FC 302 with Connectors
Connectors
Overview
The frequency converter has 7 connectors plus 2 or 4 motor
connectors.
Label
X1
X2.1-X2.4
X51
X52
X11-X14
Table 4.1 Connectors
X1- Mains M23 (in M25) Male
General ratings
•
•
•
Pin
1
4
3
2
D
C
Table 4.2 Wire/Connector Assignment for Plug X1
Mating part: Mains X1 (female)
Phoenix ordering number: KK-0885/XX,XX
Danfoss A/S © 11/2015 All rights reserved.
Connector Description
Mains Mains in M23 (in M25) Male
Motor Motor connection M23 Female
PROFIBUS - Male PROFIBUS M12
PROFIBUS - Female PROFIBUS M12
I/O box connector Phoenix I/O box
Pins 1, 2, 3, and 4: 480 V AC, maximum 15 A.
Pins C and D: 30 V DC, maximum 3 A.
Tightening torque: 1.5–2.0 Nm (13.3–17.7 in-lb)
Label Connected to frequency
converter wiring schematic
T1 91 (L1)
T2 92 (L2)
T3 93 (L3)
PE 95 (PE)
0 V DC 35
24 V DC 36
Minimum
2
wire [mm
(AWG)]
2.5 (14)
2.5 (14)
2.5 (14)
2.5 (14)
0.75 (18)
0.75 (18)
MI04G402